Jooooose Posted April 18, 2014 Share Posted April 18, 2014 Hi Guys, does anyone know if I can mount my two 140 fans below the rad and the rad would be directly on the case? I saw only examples were they put the 2 fans above the radiator in pull config and than to the case. Im not an IT guy, so sorry in advance if there is a problem to mount the rad directly to the case. I just thought with the current case and fan setup it would be better as the two 140 fans in front are blowing fresh air towards the graphic card and to the CPU and the 120 rear fan as an exhaust wth the top 140 fans through rad. BTW, I will remove the HDD cage for better airflow as I use only SSD and its on the back of the case... Thank you Guys in advance for your help. Jooooose Link to comment Share on other sites More sharing options...
HOODedAssault Posted April 18, 2014 Share Posted April 18, 2014 Should be no issue at all. Link to comment Share on other sites More sharing options...
Jooooose Posted April 24, 2014 Author Share Posted April 24, 2014 At the end I have installed the fans of the H110 as exhaust and below the H110 rad, got 28 celsius on idle at stock, 35-38 celsius in 4,0 GHZ overclock, under full load and couple stress tests it wont go higher than 45c, max was 48c on one core. It was very difficult to install the H110 into the 450D case, as you will definately need the upper 5,25 bay. Overall Im happy with the result... Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.