vgbaron Posted April 11, 2014 Share Posted April 11, 2014 I've had my H100 installed for about a year and have NO problems. Did not install the Link software. Just lately I've noticed that the logo color changes from white to red occasionally - I've monitored temps etc and all is normal just the led color change. Since I'm not having any issues I am not worried except wondering if it's an indication of a future problem. Have run an OCCT 100% stress test for over an hour and the temps on my 3770 4.7 overclock did not get above 75C so I KNOW the H100 is working. Thanx, Vic Link to comment Share on other sites More sharing options...
vgbaron Posted April 15, 2014 Author Share Posted April 15, 2014 anyone see this? Link to comment Share on other sites More sharing options...
wytnyt Posted April 15, 2014 Share Posted April 15, 2014 profiles on the block may have changed causing the led to get out of sync but its just a glitter factor and wont affect operation... Link to comment Share on other sites More sharing options...
vgbaron Posted April 15, 2014 Author Share Posted April 15, 2014 Great! I know ir's working as expected but wondered if I should be concerned. Thanx! Vic Link to comment Share on other sites More sharing options...
mouse007 Posted April 17, 2014 Share Posted April 17, 2014 Hi vgbaron, I'm having the same issue with mine, see earlier post. As suggested by some forum members, check the sata power connection is ok. I can't find a reason for this playing up and I've tried the LINK software to no avail. I initially wasn't to concerned about it but having water above your expensive components....you want it to be running flawlessly. I'm going to RMA mine. I've had no response from corsair on the issue yet. Cheers Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.