Dark Volker Posted April 11, 2014 Share Posted April 11, 2014 I think the screws used by the H50 radiator are 6-32 correct? I am going to do a push/pull configuration until I build my own watercooling loop. If so, then what length screw would I need to mount a single 120x25mm fan on the bottom side of the radiator? I don't want to get one that is too long and damage the radiator fins. As for the screws for the top of the radiator, they will be going through the top sheet metal of my case, a 120x25mm fan and then secure to the H50 radiator. The radiator with push/pull configuration will be mounted horizontally at the top exhaust of my case by the way. I am thinking 1" long screws will be way too short, so will 1 1/8" or 1 1/4" screws be the best fit? Thanks! Oh and another thank you to Corsair for making such a great completely sealed kit with this H50. I have had it for a few years now with no issues whatsoever. I would be getting an upgraded version, but now I am wanting a loop to cool my CPU, motherboard and GPU with two radiators(1x dual 120mm and 1x single 120mm radiators). Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.