dustyk Posted April 11, 2014 Share Posted April 11, 2014 IM sorry for such a easy question but I am at a loss. How do I connect the fans to the water block/pump with the provided cable? The 4 pin connector on the fans no way work with the proprietary Y cable they give you to use. Thanks Dusty Link to comment Share on other sites More sharing options...
dustyk Posted April 11, 2014 Author Share Posted April 11, 2014 Please disreguard. I feel like a huge idiot. There are pin connectors on the y cable. remove them and all is good. Link to comment Share on other sites More sharing options...
wytnyt Posted April 11, 2014 Share Posted April 11, 2014 Please disreguard. I feel like a huge idiot. There are pin connectors on the y cable. remove them and all is good. :D: and another gets stumped but dont feel bad,many have the same issue,but you solved the riddle...;): Link to comment Share on other sites More sharing options...
gotto Posted April 11, 2014 Share Posted April 11, 2014 I love my h100i right now my cpu is sitting at 86 degrees vs the crapola cheap intel stock cooler wich the cpu was at 140-145 degrees!! Link to comment Share on other sites More sharing options...
dustyk Posted April 17, 2014 Author Share Posted April 17, 2014 So what kind of temps do you guys get with this? After running it for a week I am sitting at around 40C at idle. I am overclocked at 4.2 I would like to get to 4.5 but running Prime95 I get up to 85-90C. I was curious if I need to change the thermal paste or fans to a better model. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.