alphainfinity Posted April 7, 2014 Share Posted April 7, 2014 I am seeing some conflicting reports online of the H100i not mounting inside the 500r(bumping into ram etc etc). Anybody have this setup? I am running this motherboard with a 2500k OC'd. P8Z68-V PRO GEN3 Link to comment Share on other sites More sharing options...
G50EED Posted April 8, 2014 Share Posted April 8, 2014 No such issues here. Link to comment Share on other sites More sharing options...
wytnyt Posted April 10, 2014 Share Posted April 10, 2014 none here running Asus m/b w/ 4 filled slots of Crucial... Link to comment Share on other sites More sharing options...
davidman92 Posted April 10, 2014 Share Posted April 10, 2014 I'm running an H100i in the top of a 500R as push exhaust. The rad is in the top compartment, the fans are in the case. The rad is a bit tight, height wise. It fits, but it pushes the center of the cover up about a millimeter. Not a problem. The fans fit inside just fine. I've got a Maximus VI Hero. The CPU power cable is a little close, but not at all conflicting. RAM slots have nearly an inch of clearance at the top. Link to comment Share on other sites More sharing options...
jugman Posted October 4, 2014 Share Posted October 4, 2014 hi guys have the same prob. like alphainfinity, thout about doing it same as davidman92 but still have problems with the company. why in heavens sake cant they say what fits where, my case, my memory, power suply,H100i all my stuf are from them dont mean there bad but hard to understand why wouldn`t H100i fit in the case that comes from the same company ? I think most of the motherboards have the same shape, my power suply fits hardly in the case and i had to take off the rubers from it. I`m missing a dicent user manual too, some information is failing like some cabels, some front panel switches and spectialy how to connect the power cable from the front fans. Sorry that I wrote so long but couldn`t help it. so have a nice time and hope to hear from you. jugman Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.