cwasson Posted April 7, 2014 Share Posted April 7, 2014 So I've got the Corsair CX600M PSU, and I'm looking into buying the NZXT Grid fan controller, but I don't have any extra molex or 4-pin outputs from my PSU. I've been looking for adapters from the modular cables of my PSU that are 6 pin to molex, and all I've been able to find are the one's for graphics cards. My PSU came with a 6 pin to molex, but I can't find a single other one that I think I can use. I might just be an idiot, but will something like this: http://www.performance-pcs.com/catalog/index.php?main_page=product_info&cPath=186&products_id=21141 do the job? TL;DR: Will that cable work in a Corsair CX600M as an adapter between 6 pin and molex. If not, where can I find one? Thanks y'all. Link to comment Share on other sites More sharing options...
Corsair Employee jonnyguru Posted April 7, 2014 Corsair Employee Share Posted April 7, 2014 That adapter will work between any 6-pin PCIe and a Molex. Another alternative is, of course, a Molex splitter. Link to comment Share on other sites More sharing options...
cwasson Posted April 8, 2014 Author Share Posted April 8, 2014 Just to make sure we're on the same page, I could connect that cable into one of the modular ports on my PSU and it would give power to anything I connect to it? And the same can be said about a splitter? Link to comment Share on other sites More sharing options...
Corsair Employee jonnyguru Posted April 8, 2014 Corsair Employee Share Posted April 8, 2014 No. You can't plug a PCIe to Molex DIRECTLY into the modular interface of the PSU. The pin out is different. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.