Jump to content
Corsair Community

My h100i pump is NOISY


pontush

Recommended Posts

I wrote in another thread and seems like my pump is noisy but I'll write my own thread to make sure.

 

I got the newest set of drivers, I tried both Corsair Link Installer RC v2-4-5110

and now I currently used the newst ones I found on the forums, BETA version.

 

I got my fans set up to the Corsair Link Commander, so I did not upgrade the firmware. Even though my program first told me to - so I did also upgrade firmware, did not solve my problem. So then I uninstalled, reboot and then reinstalled newest set of drivers.

 

However, I made a youtube video of this, you can CLEARLY hear the noise.

As you will see in the video, I will stop every fan in the computer, and the sound still persists. I did not stop the GPU fan, since I have stopped that before and I'm sure it is not what makes the noise. I've also held my ear to the PC and it is around the processor section and not the PSU / harddrives that makes this noise. Tbh, my fans are running at such low RPM so when I put my fans off/on it's like no noticeble change at distance. All I hear is that pump noise.

 

However, check the video out. Should I make RMA? And Thank you for watching.

[ame]

[/ame]
Link to comment
Share on other sites

Hello, I still wonder about this issue.

I have read some about putting the computer on the side, I have now done this, how long should I have it on the side?

 

At the start I heard small fish tank noise - was that air moving from pump? Cause it started while I had it on the side.

Link to comment
Share on other sites

Damnit, I really hate RMA so much work behind it. Buying new cooling paste, unmount h100i, mount standard fan, wait few weeks and then get new h100i and mount that =(

Is there any chance I could get a new pump before sending mine? I mean, you can clearly here it's the pump that make the noise since I stop all the fans. =o

Link to comment
Share on other sites

Damnit, I really hate RMA so much work behind it. Buying new cooling paste, unmount h100i, mount standard fan, wait few weeks and then get new h100i and mount that =(

Is there any chance I could get a new pump before sending mine? I mean, you can clearly here it's the pump that make the noise since I stop all the fans. =o

 

just go with a advanced rma and the new unit is sent first...

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...