shawn_ Posted March 11, 2014 Share Posted March 11, 2014 I just purchased a new Voyager flash OTG 64gb drive. I created a bootable environment to install Windows operating systems and for troubleshooting tools etc. I have a trendnet 64gb drive that was setup identically. Every Lenovo laptop will not recognize this drive at boot. I have updated the bios on all models. I did some research and noticed that the old voyager drives had similar issues that were eventually patched by a Lenovo bios update. I have not seen any posts about my issue anywhere. I understand this is a new drive and maybe Lenovo has to patch their BIOS but I want to rule out any issues with this new drive. Is there firmware for it? I checked this site and didn't notice any. Anyone have any ideas? I might need to return this drive. Link to comment Share on other sites More sharing options...
Toasted Posted March 12, 2014 Share Posted March 12, 2014 There are currently no firmware updates for the Flash Voyager GO. Does the USB work fine when Windows is running? Have you tried checking if the USB is detected on boot on another computer? Link to comment Share on other sites More sharing options...
shawn_ Posted March 13, 2014 Author Share Posted March 13, 2014 There are currently no firmware updates for the Flash Voyager GO. Does the USB work fine when Windows is running? Have you tried checking if the USB is detected on boot on another computer? Yes, it works on other branded computers but seems to only have an issue with Lenovo laptops. I have tried it on a T400 and X220 with the same results. Link to comment Share on other sites More sharing options...
Toasted Posted March 14, 2014 Share Posted March 14, 2014 Contact Lenovo and see if they can help. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.