Search the Community
Showing results for tags 'adapter'.
Found 4 results
-
Hello 👋 I have a Corsair HS60 PRO headset Suddenly, without warning, I was playing Valorant. Suddenly the speaker sound disconnects for a minute or two and then suddenly comes back, but the sound is weak and there are problems and strange sounds. I checked the ICUE program, the program did not show me the headset, I deleted the program and reinstalled it, but the same problem and within the Windows settings writes to me that the headset is not known As HS60 pro, I decided to remove the shunt and use a 3.5mm wire. It works without problems, but when connected via USB, the reputation does not appear in the program and does not work Note that I sent to support via e-mail and no one responded to me. Please support as soon as possible. Thank you
-
I recently upgraded my motherboard, ram and cpu to the ASUS B450M Aii, Corsair Vengeance ddr4 3600 RGB PRO, and Ryzen 5 5500, which lead to another problem. My DEEPCOOL Matrexx55 ARGB-W case, with mounted LED strip(5v), and 6 CF120(5vARGB) fans will not work with the 12v RGB header on the mobo for RGB control. The Commander Core XT looks like the route I would prefer to go, since I already use iCue for my K55 Keyboard, Void Elite headset and the new Vengeance Pro RGB ddr4 3600 ram. When I initially build out the case, having all branded products seemed logical, especially with the RGB controller built into the case. While I can still use the case for lighting, I would much rather use software and have more control over the RGB. After determining that the 12vRGB header on the mobo isn't compatible with the ARGB fans, I found a DEEPCOOL 12v-5v Transfer hub. That didn't solve the problem either, as ARGB and RGB don't work the same. I am using 6 DEEPCOOL CF120 fans, 3 mounted in the front, 2 in push/pull on a Coolermaster Hyper212 EVO and one for exhaust in the rear. I would be much happier to control everything with iCue instead of using the case mounted controller. Is there a connector/adapter to use my DEEPCOOL products with the Corsair Commander Core XT to control the lighting in my case? Current Build - Case : https://www.amazon.com/pre-Install-MATREXX-55-V3-ADD-RGB/dp/B07Z8T2BZN?th=1 Fans : https://www.amazon.com/DEEPCOOL-CF120-3in1-Customizable-Addressable/dp/B07D3K4XG1/ref=sr_1_1_sspa?crid=2QGP9UI3V23TJ&keywords=deepcool+cf120&qid=1654298004&s=electronics&sprefix=deepcool+cf120%2Celectronics%2C87&sr=1-1-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUExVUlPQkRLRTRNTThQJmVuY3J5cHRlZElkPUEwNzI1NjE3MkNGVzZTN1dITjZFRyZlbmNyeXB0ZWRBZElkPUEwODUyMDc5MkczUkFaTzRUS1BSTiZ3aWRnZXROYW1lPXNwX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU= 5v-12v Transfer hub : https://www.amazon.com/DeepCool-RGB-convertor-ADD-RGB-Transfer/dp/B09Y8V5X98/ref=sr_1_1_sspa?keywords=deepcool%2Brgb%2Bconverter%2B12v%2Bto%2B5v&qid=1654298032&s=electronics&sprefix=deepcool%2B5v%2Celectronics%2C82&sr=1-1-spons&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUFFVDZZSUY0SjkyRzImZW5jcnlwdGVkSWQ9QTA4NTYxNjUzM01TWDkzM1VXTkZYJmVuY3J5cHRlZEFkSWQ9QTAwMDIxMTgyVlREUEVWVk5WUElIJndpZGdldE5hbWU9c3BfYXRmJmFjdGlvbj1jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ&th=1 Motherboard : https://www.amazon.com/dp/B08KH12V25?psc=1&ref=ppx_yo2ov_dt_b_product_details RAM : https://www.amazon.com/dp/B08SQ75MP7?psc=1&ref=ppx_yo2ov_dt_b_product_details -
Preparing your PC for the new NVIDIA GeForce RTX 30-series cards? Read up on what this means for your power supply and power cables to keep a clean looking build! https://www.corsair.com/us/en/blog/prepare-for-nvidia-30-series TL;DR RTX 30-Series Founders Edition cards include an adapter that converts two dedicated PCIe power cables into the 12-pin connector. We're producing a full cable that connects to two PCIe/CPU ports on your Type 3 / Type 4 PSU to eliminate the increased resistance of an adapter (and cut down on clutter for those that take pride in pristine cable management). Link to form to be notified when the cable is ready (I've been told users on mobile are having issues with the link in the article) https://sdqk.me/oLLuei1j/sign-up-for-corsair-12-pin-psu-cable-updates#/enter
-
I recently bought a HX1200 PSU, and the main power cable (that plugs into a wall socket) comes with a US 3 pin plug. On the plug it says "15A 125V 1875W". I have a separate "travel" adaptor where it says "13A 250V CHECK YOUR APPLIANCE IS COMPATIBLE WITH 250V~ SUPPLY". I'm not entirely sure if the specs above make the adapter and power cable compatible or not. Would it be recommended to get a power transformer of some sort (if so, what brand / model)? Or is it ok to use my standard adaptor? (Apologies I couldn't upload any photos despite trying jpeg, jpg and png; the uploader always threw an error saying these weren't valid files).
