Search the Community
Showing results for tags 'h45'.
Found 4 results
-
My brand new H45 Hydro cooler is making noise at the radiator part. I don't know how to explain exactly, but it is high pitched noise like high voltage electric charge voltage. I don't know if this is normal, but it is a bit disturbing when there is complete silence in the living room. You don't hear it when there is music, it's a low dB noise. In addition, the primary fan on the processor is 4200 rpm on average, cannot be changed, it defaults to automatic. I don't know if this is normal? On the other hand, on the Asus AI Suite 3 software I can adjust the optional fan which is on the radiator part only. He's silent, that's perfect. But I am coming to you to find out if there is any way to adjust this high pitched background noise on the radiator part, like a high voltage hum. Sorry for my English, I'm in French, I'm doing the translation with Google. : o:
-
Hi, i wanted to silence my Pentium g4560 (no OC, 54W TDP), so i bought a H45 and connected the pump to pwm. I replaced the fan with a cheap coolermaster spinning at around 600rpm, so i can't hear the fans it in a totally silent room 50cm away from my pc at my desk. But the Pump of the H45 makes a really "loud" drone noise, like a vibrating dvd burner on a wooden table, but a bit quieter. It goes near silent if i clock the reported 4500rpm to around 3k-3,5k rpm at my bios. Temps are with stockfan H45 and new fan on H45 at full RPM around 40° C at prime tests, and around 46° C with intel boxed fan. Idle temps in all setups around 30° C, with nearly 30° C inside case and 27° C room temp, so the H45 has to cool very little heat away. Because the H45 have a separate connector with only the pump connected (i think, or is there any chipset/board inside?) and no LED, USB or anything, and the fan(s) on separate connections: Is it safe (for the H45, not the CPU or other components) to powerdown the pump to round about 60-70% of the speed it gets on 12V? Does it increase wearing-out in a very high level (destroying pump in way less than 24 months)? Or is all that talk about "stay on 12V ever!" only for the other Corsair Hydro AIOs with a lot more compenents on pump-power-cable, like usb, led-lights, controlling board? If not, do you know if that loud sound is a valid RMA reason in germany?
-
Hey guys, i've got a nATX mainboard with (only) a 4 PIN CPU_FAN and a 3 PIN CHASSIS_FAN. Both of them are marked with 12V. Whats the best way, to connect the watercooler h45? the manual recommend to connect the 3 PIN to the CPU_FAN and the 4 PIN to a chassis fan. My idea is to connect it in the opposite way: 3 PIN to my 3 PIN CHASSIS_FAN and the 4 PIN to my 4 PIN CPU_FAN. Whats your recommondations? Note: I've started up once to check if my diy server posting and all works fine (the fan is running). Thanks Benini
-
Hi guys, I have an H45 WC that I bought a long time ago, before AM4 release. Does anyone know where I can find all measurements for the AM4 mounting bracket or if you can and send to me? In Brazil I found to buy but is overpriced so I will fabricate. Can anyone help me? Thanks. Water Cooler Corsair Hydro Series H45, CW 9060028 WW
