epjkb Posted October 5, 2020 Share Posted October 5, 2020 So for the past 2 months, one of my two Vengeance RGB Pro DDR4 Ram sticks has been having an issue with the RGB lighting where it won't start until after I load up iCue. Normally when you start your computer all your rgb equipment will light up and then go to whatever settings you have in icue, but mine just wont start until iCue is running. What is wrong with it? Here is my system specs if it matters: https://pcpartpicker.com/user/epjkb_games/saved/fcfz7P Link to comment Share on other sites More sharing options...
Corsair Employee Corsair Notepad Posted October 6, 2020 Corsair Employee Share Posted October 6, 2020 You need to go into the Settings menu in iCUE, select the memory, turn off "Enable full software control," go back to the main menu in iCUE, select your memory, go to Lighting Effects, and set an effect. Do note however if you do not wish to have the RGB memory LEDs on when you put your system to sleep, or your computer provides power do the DRAM when the computer is off, your modules will be lit if you do the above steps. Link to comment Share on other sites More sharing options...
Recommended Posts