The Corsair User Forums  

Go Back   The Corsair User Forums > Corsair Product Discussion > iCUE Software


Thread Tools Search this Thread Rate Thread Display Modes
Old 12-14-2019, 12:35 AM
Phnx_e333 Phnx_e333 is offline
Registered User
Join Date: Dec 2019
Posts: 10
POST ID # = 1027424
Phnx_e333 Reputation: 10
Default Corsair Ironclaw RGB Wireless

So I ran into an issue with my Ironclaw RGB Wireless where it would behave as if iCue weren't open and my Profile would switch to the Hardwired ones. I see many others have experienced this same issue which seems to have come with the update that took place between 12/5/19 and 12/11/19 this month.
  • In iCue it listed a series of (1)s after the name

    In the middle of games the profile would switch along with DPI It would work again if I took out and reinserted the dongle or power cycled the mouse.

    Soft resets didn't work, and Corsair hasn't responded to my service request from a week ago now with the firmware to hard reset the mouse.

This was frustrating as I couldn't last 10 minutes without the settings being lost and changing up in the middle of games I was playing.

BUT the good news is that after I decided to go ahead and revert back to iCue version 3.21.88 last night, I haven't had a single issue since then. I'm currently in a Destiny 2 session for a little over 2 hours and haven't had any issue at all. I think this is the best that can be done until a new iCUE version comes out that addresses the issue.

So after playing for about 4-5 hours the problem eventually came back, I think this is the longest I've been able to play continuously without problems since the issue first arose last week. I'm going to keep messing around and see if I can figure this out.

Last edited by Phnx_e333; 12-14-2019 at 09:20 AM. Reason: Update
Reply With Quote

dpi, ironclaw, profile, rgb, wireless

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -4. The time now is 12:00 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, vBulletin Solutions, Inc.