racesupport Posted September 13, 2019 Share Posted September 13, 2019 Hello :) I had to send back my graphics card for warranty and now I have to mount the water block again. How thick are the original thermopads? Or what thickness should I use? Link to comment Share on other sites More sharing options...
Corsair Employee Corsair GregX Posted September 14, 2019 Corsair Employee Share Posted September 14, 2019 Hi! You should be able to reuse existing thermal pads. Replace them only if they are teared. On XG7 RGB 20-SERIES GPU Water Blocks, original thermal pads are 1mm thick. Link to comment Share on other sites More sharing options...
knacker40 Posted September 14, 2019 Share Posted September 14, 2019 Hi! You should be able to reuse existing thermal pads. Replace them only if they are teared. On XG7 RGB 20-SERIES GPU Water Blocks, original thermal pads are 1mm thick. I think the correct word is “torn” :D::D: Link to comment Share on other sites More sharing options...
tiborrr Posted September 15, 2019 Share Posted September 15, 2019 You don't have to replace thermal pads as they are meant to be reused. This is why these pads do not hack natural tick (stickiness) on the exposed side :hihi: Link to comment Share on other sites More sharing options...
Recommended Posts