Nioni Posted July 3, 2014 Share Posted July 3, 2014 Room Temperature: 26 Celsius http://i.imgur.com/xGiT136.png Are these temperatures on idle ok? What do you think about my custom h100i fan curve? these are the stock fans. I think my cpu is running way hot for idle temperature. Is there any way i can test if my h100i works properly? -- I tried Prime 95. 4930k @ stock speed (3.4ghz) I didn't keep it 1 hour, only about 15min. I thought it was way hot for its stock speed. I believe there is something wrong with my cooling solution. http://i.imgur.com/ZqTy8Tg.png http://i.imgur.com/N9lJmsw.png Link to comment Share on other sites More sharing options...
Ahtlon Posted July 3, 2014 Share Posted July 3, 2014 Try to reseat the H100i pump on your cpu, look if the cooler/pump isn't resting on something of the mobo.Is your cpu fan controller disabled in the bios, the controller should be disabled, pump has to work on full speed. The most important part are the load temps, 68 is a little to high, but it is at the normal site, full workload 6 x 3.6Ghz. Also room temp are 26c, so I would say not to bad. Also some 4930k run cooler as other and some run hotter. It's a lottery. Link to comment Share on other sites More sharing options...
Nichrome Posted July 4, 2014 Share Posted July 4, 2014 By the way: I have noticed that Corsair Link says Avg (average). Try different software to monitor temps and see if there's any difference. Link to comment Share on other sites More sharing options...
HOODedAssault Posted July 5, 2014 Share Posted July 5, 2014 Use real temp n ur temps don't look bad. Wats the voltage in cpuz under prime. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.