The Corsair User Forums  

Go Back   The Corsair User Forums > Corsair Product Discussion > Cooling


Thread Tools Search this Thread Rate Thread Display Modes
Old 09-25-2015, 11:07 AM
coordz coordz is offline
Registered User
Join Date: Sep 2015
Posts: 1
POST ID # = 810461
coordz Reputation: 10
Sad H80 fan stuck at max, then tried firmware reset, now dead :(

I decided to upgrade to some dual GTX 980 TI cards and in the process needed to change power supply. This involved unplugging my H80 molex and then replugging it in. After this switch, everything started up just fine but instead of the radiator fans on the H80 spinning up and then idling back down after boot they stayed at max.

Looking around the forums I found some threads with similar problems
so I tried doing a reset of the firmware.

The first time I did this reset, all worked fine and after the reset the fan speed became adjustable again. However, power cycling the system put the fans back up to max and unable to be changed via the button on the controller.

The second reset attempt led to control being restored to the button on the controller. However, after a number of presses to switch between fan settings, the fans completely switched off and all lights went out on the controller. Further presses of the button didn't help. (While doing this pressing I was monitoring the RPMs in the BIOS and then were around 2300 and then went to N/A when the fans died).

So far I've tried a number of power cycles, some resetting long presses and leaving the machine without power for a few hours. Each time after restarting I get a "CPU fan error" from the BIOS.

Restoring power after a few hours causes the fans to 'twitch' but then nothing. My current plan is to leave the machine without power for a few days and then try again......

Can anyone help me with this? It seems like the firmware in the H80 has got in a funny state and has decided not to work. Right now I just need to get the pump going again as I can always plug the fans into my mobo.

Reply With Quote

Old 09-25-2015, 11:28 AM
Corsair Dustin's Avatar
Corsair Dustin Corsair Dustin is offline
Corsair Employee
Corsair Dustin's PC Specs
Join Date: Oct 2013
Posts: 4,099
POST ID # = 810467
Corsair Dustin Reputation: 41

I'd get in touch with customer service and see if they can't just outright replace the H80.
Corsair DIY & Gaming Systems Architect
Product Manager for Cooling

Please do not send private messages requesting tech support or trouble shooting. You can create a thread and let the solution to your issue be visible to everyone, or alternatively, work directly with tech support by contacting them here.
Reply With Quote


fan speed, firmware, h80, reset

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -4. The time now is 12:41 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, vBulletin Solutions, Inc.