saoliver Posted April 2, 2015 Share Posted April 2, 2015 Having frequent BSOD. Gigabyte GA-H97M-D3H (Rev 1.0) Bios F5 (Optimized Defaults) Intel I5 4460 Gainward GTX 970 Phantom Corsair 8GB Vengeance C9 DDR3 1600MHz (In BIOS listed as 1333Mhz, Auto Specs) Samsung 840BW EVO 256GB Silverstone Strider Plus 500W Errors when running Memtest with 8 passes on both ram sticks (only from Memtest UEFI). No errors from Memtest (UEFI) on individual sticks. I have attempted this with and without XMP profile 1 enabled to upgrade to 1600MHz. I have also ran the individual tests on both DIMM 1 and/or DIMM 2. Please help. Link to comment Share on other sites More sharing options...
Nichrome Posted April 3, 2015 Share Posted April 3, 2015 Sounds like you are mixing RAM? Even though they might look same and have same spec, might not work properly if you bought them separately. Did you try to clear CMOS? Refer to motherboard manual. Link to comment Share on other sites More sharing options...
saoliver Posted April 3, 2015 Author Share Posted April 3, 2015 The memory was purchased as a kit. I have tried clearing the CMOS and nothing changes. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.