madevilPhyserl8 Posted February 24, 2020 Share Posted February 24, 2020 (edited) Hello, At the moment I´m using a Xilence Liquirizer LQ240RGB for cooling the Threadripper 3970x on a Gigabyte TRX40 Designare, but the problem is that with the full set of RAM modules the Liquirizer pumphead won´t fit between them anymore. Is there a Corsair water cooling solution, AiO or not wich will fit between the RAM Modules? I measured about 9 cm 3.54330709 Inch/s space between the RAM modules, but not entirely sure of this measurement is correct. Edited February 25, 2020 by madevilPhyserl8 Link to comment Share on other sites More sharing options...
madevilPhyserl8 Posted February 25, 2020 Author Share Posted February 25, 2020 Corsair Hydro Series H115i RGB Platinum Hydro X Series XC9 RGB CPU Water Block (2066/sTR4) will one of those solutions fit between the modules without turning them 90 degrees? Link to comment Share on other sites More sharing options...
madevilPhyserl8 Posted March 17, 2020 Author Share Posted March 17, 2020 The Corsair Support is saying both are fitting without turning them, I ordered the H150i RGB Pro XT now. This have the same pumphead as the H115i RGB Platinum. So I hope for the best. Link to comment Share on other sites More sharing options...
Recommended Posts