Jump to content
Corsair Community

DDR4 Part Numbers


Technobeard

Recommended Posts

  • Administrators

Here's a list of the DDR4 modules that have been announced so far along with their specs and links to their product pages.

 

DDR4 Landing Page

 

DDR4 FAQ

 

DDR4 Whitepaper

 

The SPD settings for DDR4 modules are

Speed: 2133 MHz

Latency: 15-15-15-36

Voltage: 1.2V

 

DDR4 Memory: http://www.corsair.com/en-us/memory/popular-memory/ddr4-memory

 

Press Release: Corsair Ushers in Next-gen PC Platforms with Vengeance LPX and Dominator Platinum DDR4 Memory

 

[ame]

[/ame] Edited by Technobeard
DDR4 table removed
Link to comment
Share on other sites

  • 4 weeks later...

G'Day Corsair Staff!

 

I'm planing to build me a new computer based on ASUS Rampage V Extreme and some new Corsair products as well.

 

My question: When are you planing to come out with Corsair Dominator Platinum 32GB (4 x 8GB) 3300MHz DDR4 Memory KiT? As far as I understood of what I have been reading Corsair have some sort of project together with Asus regarding the Corsair Dominator Platinum 3300MHz DDR4 and Rampage V Extreme.

 

I will load up a picture on my new computer when it's finish, but be patient it might take some time do to the availability of components.

 

Regards, WOLF.

Link to comment
Share on other sites

G'Day!

 

Thank you for your reply to my email.

 

It's completely understandable. Sorry for my disrespectful question.

 

Of course, me like everyone else has to patiently await for the release of the Corsair products.

 

Hopefully Corsair release the following (for me) interesting products in the proximity of time since I'm in the process to configure my new ASUS ROG R5E X99 Chipset Computer.

 

  • Corsair dominator Platinum 64GB (8 x 8GB) 3300MHz PC4-26400 DHX XMP2.0 288MP DDR4 Memory Kit.
     
  • Corsair dominator Platinum 32GB (4 x 8GB) 3300MHz PC4-26400 DHX XMP2.0 288MP DDR4 Memory Kit.

 

With that, I thank you for this time and wish Corsair Staff & Forum Members all the best for future to come.

 

Yours Sincerely, Bengt "WOLF" Johansson.

Link to comment
Share on other sites

  • 3 weeks later...

Thank you kindly Technobeard for your understanding.

 

I'm looking every day for the Corsair Dominator Platinum Series 32GB (4 x 8GB) DDR4 DRAM 3300MHz Memory Kit to come up in the Dominator Platinum 32GB (4 x 8GB) DDR4 sections at your web page.

 

That is the only product left to wait for until I can make my order based on ASUS ROG RAMPAGE V EXTREME motherboard. Sure there are some more articles on top of that, but no major for the purchase to my project.

 

PS. I wonder who got the longest beard of us since I look more like Santa Claus with my long silver colored beard.:biggrin:

 

Yours Sincerely, Bengt "WOLF" Johansson.

Edited by WOLF
Link to comment
Share on other sites

  • 1 month later...
  • 2 weeks later...
  • Administrators
Is there an ETA on the Vengeance Pro series for DDR4 yet? I'd like to purchase that instead of the platinum series, so if possible, I'd like to know when I should be saving my money for :)
The Press Release only covers Vengeance LPX and Dominator Platinum. Vengeance Pro was not mentioned.

 

EDIT: I confirmed that we currently have no plan to introduce Vengeance Pro DDR4. LPX is the Vengeance line for DDR4.

Edited by Technobeard
Link to comment
Share on other sites

  • 3 months later...

CMK = Vengeance LPX

CMD = Dominator Platinum

 

That is pretty easy to see from the table in the opening post.

 

DS = Double sided modules, ICs on both sides, usually 16 total (probably also dual rank)

SS = Single sided modules, ICs on one side only, usually 8 total (probably also single rank)

 

Effective memory latency is a result of memory timings and clock rate. However this is probably not the right thread to go on about that topic ;)

 

Just head for the FAQ that is linked above and continue with the DDR4 whitepaper.

Link to comment
Share on other sites

CMK = Vengeance LPX

CMD = Dominator Platinum

 

That is pretty easy to see from the table in the opening post.

 

DS = Double sided modules, ICs on both sides, usually 16 total (probably also dual rank)

SS = Single sided modules, ICs on one side only, usually 8 total (probably also single rank)

 

Effective memory latency is a result of memory timings and clock rate. However this is probably not the right thread to go on about that topic ;)

 

Just head for the FAQ that is linked above and continue with the DDR4 whitepaper.

 

Thanks for your promptly answer and directions to where to get further information.

Link to comment
Share on other sites

  • 1 month later...

Is there any way to purchase 16GB of Dominator Platinum DDR4 Memory in a 2x8GB configuration? I would really like to use it in a build with an ASrock x99E-ITX board, but I can't really justify buying a 32GB kit and only using half of it.

 

Thanks

Link to comment
Share on other sites

  • Administrators
Is there any way to purchase 16GB of Dominator Platinum DDR4 Memory in a 2x8GB configuration? I would really like to use it in a build with an ASrock x99E-ITX board, but I can't really justify buying a 32GB kit and only using half of it.

 

Thanks

 

Yes, it's on the list.

Link to comment
Share on other sites

  • 8 months later...
  • Administrators
Hi All,

 

Is there information on how to decode the part numbers ?

 

i.e. what is the 'B' in the following part number represent ?

 

CMD32GX4M4B3000C15

 

Regards

Check out the product page for that module or the Memory Part Number Breakdown for more info.

Link to comment
Share on other sites

×
×
  • Create New...