xdrive82 Posted April 4, 2020 Share Posted April 4, 2020 Hello I got a Commander PRO to which 4 BeQuiet! Silent Wings 3 1600rpm and 2 Fractal Design 2000rpm fans are connected. However as you can see in the pircture attached, the scale in ICUE is from 0rpm to 5000rpm. This makes it quite annoying to make a curve since everything above 1600 and 2000rpm is full speed anyway. Anyone got any Idea why it cant detect the FANS max RPM? Thanks in advance for any answers. Link to comment Share on other sites More sharing options...
c-attack Posted April 4, 2020 Share Posted April 4, 2020 The fan graph does not scale. It is fixed for that range. Use the X:Y input boxes in the lower left corner rather than trying to drag points, unless you have surgeon like precision. Link to comment Share on other sites More sharing options...
xdrive82 Posted April 4, 2020 Author Share Posted April 4, 2020 Oh i see, thank you. I used this Corsair Commander Pro before and then i went to another solution which calibrates the fans and adjust so 100% is max rpm of the fan. But i guess i kinda forgot that ICUE does not do this then. Link to comment Share on other sites More sharing options...
c-attack Posted April 4, 2020 Share Posted April 4, 2020 You are not the only one to mention it and hopefully it is on the to do list for future updates. Link to comment Share on other sites More sharing options...
Recommended Posts