The Corsair User Forums  

Go Back   The Corsair User Forums > Corsair Product Discussion > Cooling

Reply
 
Thread Tools Search this Thread Rate Thread Display Modes
  #1  
Old 08-04-2019, 03:42 PM
bern75 bern75 is offline
Registered User
 
Join Date: Jul 2019
Posts: 2
POST ID # = 1013691
bern75 Reputation: 10
Default H115i PRO Install Questions

I'm building a new computer (19-9900k based) and I am using a H115i PRO for cooling but I am having an issue with the install of the system. I have the plastic back mounting piece on and the correct bolts (LGA 115X/1366 Standoff Bolts) installed but the back piece is lose. The bolts are completely tightened down but it still has a lot of play back and forth. I figure that when I put on the actual cooling block, it will tighten down. I have installed an H50 in the past and I had no issues.
I have looked online a lot but I see where people are either saying that it will tighten up once the block is installed and then I have also read about people using rubber washers. I really don't want to use the washers because the system wasn't designed that way and I can imaging that the washer will eventually deteriorate.
Any advice on installing the 115i would be greatly appreciated.

FYI, I am using a MSI MPG Z390 Gaming PRO Carbon AC motherboard if this helps.

Corsair 115i Pro RGB = https://www.newegg.com/p/N82E1683518...82E16835181138

MSI Motherboard = https://www.newegg.com/p/N82E1681314...9SIACVB8S95863
Reply With Quote


  #2  
Old 08-04-2019, 04:42 PM
c-attack c-attack is offline
Registered User
c-attack's PC Specs
 
Join Date: Jun 2014
Posts: 9,251
POST ID # = 1013695
c-attack c-attack Reputation: 107
Default

You shouldn't need extra washers and the pump/block will tighten down when the thumbscrews go on. I have not seen any specific complaints on that motherboard. The bracket is for weight distribution and as an anchor point. Preferable not to nail it to the mast. Too much socket pressure is serious problem. Better to err on the side of caution when judging clamping force or pressure.

Last edited by c-attack; 08-04-2019 at 06:30 PM.
Reply With Quote


  #3  
Old 08-04-2019, 05:35 PM
bern75 bern75 is offline
Registered User
 
Join Date: Jul 2019
Posts: 2
POST ID # = 1013711
bern75 Reputation: 10
Default

"Preferable not to nail it to mast." Whaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaat!?!?!?!? People in the IT fields NEVER do this <SARCASM> :) Thanks, I'll give it a try.
Reply With Quote


Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:44 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.