BattleBrisket Posted August 28, 2015 Share Posted August 28, 2015 I have a new pair of VOID headsets with the CUE software installed, and the lights just continually blink red when powered on and not plugged into the charging cable. The manual says a steady red light indicates that a low battery, but I fully charged them to ensure that wasn't a problem. I tried configuring some lighting groups in the software, but they don't seem to do anything. Help? Link to comment Share on other sites More sharing options...
Randymartin4425 Posted September 1, 2015 Share Posted September 1, 2015 I am having the same problem I believe.. my little red light on the mic constantly blinks red and its fully charged as well... it also goes on and off on its own constantly and sound goes in and out... nothing is obstructing the wireless device and i cannot figure out how to fix the problem Link to comment Share on other sites More sharing options...
Toasted Posted September 1, 2015 Share Posted September 1, 2015 Corsair also mentions the LED indicates the EQ settings, Dolby setting (on/off), microphone mute status, and battery life. So you could try adjusting those and see if that changes anything. Also try playing around with the settings in CUE. InfoMic might be customisable and the blinking red is just a effect. Link to comment Share on other sites More sharing options...
Event Horizon Posted September 1, 2015 Share Posted September 1, 2015 The blinking red lights are just the first RGB default lighting setup. It is very confusing due to bad paperwork included. Just change the lighting in CUE from blinking red to whatever you like. The headset will either glow all colors when charging or the mic boom light will glow when charging (telling you the battery level). All depending on if the headset was on or off when you plug in the USB charging cable. Hope this helps. I was confused too. Link to comment Share on other sites More sharing options...
Corsair Chris Posted September 3, 2015 Share Posted September 3, 2015 I have a new pair of VOID headsets with the CUE software installed, and the lights just continually blink red when powered on and not plugged into the charging cable. The manual says a steady red light indicates that a low battery, but I fully charged them to ensure that wasn't a problem. I tried configuring some lighting groups in the software, but they don't seem to do anything. Help? @BattleBrisket, by default the earcups (with CUE running) will blink red but this can be adjusted to any color theme via CUE. If InfoMic is rapidly blinking red, that means that the headset and the dongle is having connectivity issues or needs to be synced. Link to comment Share on other sites More sharing options...
No_Smoking Posted January 4, 2016 Share Posted January 4, 2016 Does CUE come with a default set of color/pattern schemes? When I installed it, it was blank, and when I populate it, it doesnt work. Link to comment Share on other sites More sharing options...
Inheritance Posted January 5, 2016 Share Posted January 5, 2016 Does CUE come with a default set of color/pattern schemes? When I installed it, it was blank, and when I populate it, it doesnt work. for the Void it should. if its not showing up try repairing CUE, if that doesnt work reinstall it. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.