jabso Posted May 11, 2020 Share Posted May 11, 2020 I'm looking into the 465x and although it says it can fit up to 180mm long PSUs I read a review that you probably want to keep it 170mm or under otherwise it makes cable management difficult. Has anyone built using this case with a 180mm PSU? I have a RM1000i and will be needing space for 2 3.5inch HDDs. Link to comment Share on other sites More sharing options...
Corsair Employee Corsair Mint Posted May 11, 2020 Corsair Employee Share Posted May 11, 2020 Hey jabso, one thing to consider for length is that if you have a modular PSU, the connectors for the cables add length as well. So, because the drive cage is so close, it becomes very cramped for the cables to come out. A good tip is to not fully install/screw in the PSU right off the bat, so that you are still able to maneuver it and connect the internal cables to the PSU as needed. Link to comment Share on other sites More sharing options...
jabso Posted May 13, 2020 Author Share Posted May 13, 2020 Thanks for the info. Can the drive cage be moved forward towards the front of the case at all (I won't be using a big radiator up front) or is the default position the furthest it can go? Link to comment Share on other sites More sharing options...
Recommended Posts