dawit123 Posted April 19, 2020 Share Posted April 19, 2020 Hi, I would like to get some clarification on this... I'm planning to get a 1TB MP600 for my Asus x570-E I'm aware that I will have to run it without the included Corsair heatsink, should I be worried about higher temps with replacing the Corsair radiator for built in Asus one? Update: from what I read on this forum, seems like the MP600 is not a "safe" option to get as drives are diapering, not visible in BIOS etc. Link to comment Share on other sites More sharing options...
Salsiccia Posted April 19, 2020 Share Posted April 19, 2020 I saw a review of NVMe drives on the weekend, one of which was the MP-600, and it made the point that as long as you do use a heatsink, even the mobo one in place of the drive specific one, that the temp drop was still noticeable and usable. Using it without any heatsink I think would be problematic, but I *think* that as long as the ASUS one sits properly you should be fine. I have the same issue in my in progress build too - haven't settled on my choice of NVMe drive yet. Link to comment Share on other sites More sharing options...
robbinsbilly Posted April 26, 2020 Share Posted April 26, 2020 Your motherboard have coolers that mount over the m2. I think i am right Link to comment Share on other sites More sharing options...
Recommended Posts