Patishi Posted May 8, 2020 Share Posted May 8, 2020 Hi, I noticed that when adding a new customs curve the minimum rpm of the default curve is 600 rpm (at 20-30c). I just wondered if that is intentional, maybe the commander pro's hardware can't deal with lower rpm. My noctua fans are rated at 300-1500 (+/- 10%) rpm and I want to start from 450 rpm at 20c and go up from there. can someone confirm that it is ok with the commander pro? Thx. Link to comment Share on other sites More sharing options...
c-attack Posted May 8, 2020 Share Posted May 8, 2020 The minimum is whatever you designate or the minimum of the fan. The three shape tools in the top right hand corner are copies of the AIO programming curves so users can make easy copies to match Corsair AIO controlled fans. It is not a 'recommended' setting and obviously fans and needs vary widely. Your ML will have a 400 rpm minimum. You can set both those and the Noctuas to whatever you want. Link to comment Share on other sites More sharing options...
Patishi Posted May 8, 2020 Author Share Posted May 8, 2020 Thx a lot! Link to comment Share on other sites More sharing options...
Recommended Posts