The Corsair User Forums  

Go Back   The Corsair User Forums > Corsair Product Discussion > iCUE Software

Reply
 
Thread Tools Search this Thread Rate Thread Display Modes
  #1  
Old 08-10-2019, 02:14 PM
Pkrisz346 Pkrisz346 is offline
Registered User
 
Join Date: Jul 2019
Posts: 3
POST ID # = 1014289
Pkrisz346 Reputation: 10
Default LL120 RGB fans light issues

Hi everyone,

First of all it's a bit complicated, but I know for sure, you can understand it.

It's been a while since I'm struggling with my RGB fans, and soon I'm going nuts
All the parts are new, purchased recently or a couple of month ago.
All set up by myself, no issues until an iCue update.
Any of these issues, does Not effect my everyday work/gaming on my computer, it is just the visual effects. But that was the only reason I bought these parts. For the extra visual effects and that's the only thing which is not working

The fan setup is the following:
6 LL120 white fans connected to the Commander pro and to an RGB fan hub.
iCue's newest version installed. Each SATA connected. USB to USB header to the motherboard.
No issues with the fan speed, just with the lighting.

Check the pictures I attached!

When I make a new profile in iCue. I create a lighting link with static colors set to a color(for example BLUE)

In this case, the back and the two top fans lighting up without any issues, but the front ones as you can see it on the picture(sorry for the quality)

Front top fan: Only the middle LEDs light up blue with an extra 1 LED on the outer ring, rest is rainbow.
Front middle fan: Turns to rainbow, but with a couple LEDs off;
Front bottom fan: Not lighting up at all.

Changing the lighting link color to white (picture)

Back fan and top fans white, no issues there.
Front top fan: Middle LEDs white rest is rainbow
Front middle fan: Stays rainbow with couple LEDs off.
Front bottom fan: Off


And here is the funny part!!

Turning on Instant lighting as Black,(but it does the same with other colors) Black should turn off all LEDs (Picture/Picture/Picture)

Back fan: Half of the LEDs stays ON in lighter white. Rest is Off
Top fans: First white, then both lights turn off
Front top fan: Off
Front middle fan: Half is ON, in white. 1 LED blinking PINK. Rest is off
Bottom fan: Off

Changing instant color to RED (Picture/Picture)

Back fan: Half red, half off
Top fans: Off
Front top fan: Off
Front middle: Brighter white with red middle section, rest is off
Bottom fan: Off

Changing instant color to WHITE, as it's set in lighting link.(Picture/Picture)

Back fan: White
Top fans: 1 LED Off, in the inner section, rest is White
Front top fan: All White, 2 LEDs Off, sometimes blinking PINK and 1 LED blinking LIGHT BLUE
Front middle: Darker White with 1 blinking PINK, rest is Off
Bottom fan: Off

After all this, I turned OFF Instant color. (Picture)

Back fan: White, 1 LED Off in the outer section.
Top fans: 1 LED Off in the inner section, rest is White
Front top fan: All White, 2 LEDs Off in the outer section
Front middle: Darker White, 1 blinking WHITE, rest is Off
Bottom fan: Off

From here, changing the Lighting link color or changing to any other option(Rainbow, Visor, Rain, etc.) only changing the middle section of the back, front top and the front middle fans color


I've tried all the possible ways with Commander PRO, 2 Node Pro, 2 RGB fan hubs. All cables looks ok, I tried with new cables as well
Installed/Uninstalled iCue a million times, as I already tried a clean install of the Windows 10, on a brand new SSD.
The problem still exist.

WHAT IS WRONG WITH IT? HELP ME! AM I DOING SOMETHING WRONG?

Last edited by Pkrisz346; 08-10-2019 at 02:38 PM. Reason: Specs removed
Reply With Quote
  #2  
Old 08-10-2019, 02:35 PM
DevBiker's Avatar
DevBiker DevBiker is offline
CORSAIR Beta Team
DevBiker's PC Specs
 
Join Date: Feb 2017
Location: Republic of Texas
Posts: 7,393
POST ID # = 1014290
DevBiker Reputation: 88
Default

You've noted the position in the case ... but where are they on the fan hub?
This sounds like a misbehaving fan.
What you need to understand is that the fans pass the signal from one to the next. An individual fan may light up not pass the proper signal down the chain.
__________________
Please click "Edit System Specs" and fill out your system info.

This comment is provided "as-is", without warranty of any kind, express or implied, including, but not limited to, the sanity or mental fitness of the author. The author is not a Corsair employee, does not represent Corsair, and no comment should be construed as an official statement from Corsair.

Reply With Quote
  #3  
Old 08-10-2019, 03:30 PM
Pkrisz346 Pkrisz346 is offline
Registered User
 
Join Date: Jul 2019
Posts: 3
POST ID # = 1014294
Pkrisz346 Reputation: 10
Default

Fans connected in an order to the RGB fan hub:
1st: Back fan
2nd: Rear top fan
3rd: Top fan
4th: Front top fan
5th: Middle fan
6th: Bottom fan

I turned all the lights off now in the iCue. One active profile, but no Lighting Channel effects. 2 fans lighting is still on. 4th and 5th.
Is it normal? The keyboard, RAM, CPU cooler, and 1st-2nd-3rd fan lights turns off, but 4th and 5th fan lights still on. 6th working, but not in this order.

Last edited by Pkrisz346; 08-10-2019 at 03:38 PM.
Reply With Quote
  #4  
Old 08-11-2019, 09:52 AM
Pkrisz346 Pkrisz346 is offline
Registered User
 
Join Date: Jul 2019
Posts: 3
POST ID # = 1014353
Pkrisz346 Reputation: 10
Default

Tried the fans separately. 3 fans definitely bad. Only the half of the LEDs light up.
1 fan looks alright. No blinking LEDs. Changing the color as it should.
I deleted icue and 2 fans were still on, but just a couple of LEDs. Pink and blue.
I can't beleive it. Tried it so many ways now. 3 rgb fan hub. Commander pro.
These are not cheap fans, these should work without any issues...
Something is wrong with the computer, PSU?
Reply With Quote
Reply

Tags
commander, icue, ll120, node, rgb

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:50 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.