Seeby Posted November 15, 2014 Share Posted November 15, 2014 Good afternoon Corsair Forums, I had this problem during the initial set up phase of the software, and I'm also having it now while attempting to upgrade to the CUE 1.2.77. During the installation of the drivers the CUE installation software freezes, and shortly after, my whole computer freezes. I have no power of input and I am forced to a manual shutdown, only to repeat the process if I attempt to install the software again. I am in the situation where I do not have the CUE installed, and attempting to install it will just result in the freeze again. Can I please get some assistance with this? Yours Sincerely, Seeby Link to comment Share on other sites More sharing options...
probob Posted December 16, 2014 Share Posted December 16, 2014 I have this issue, what Motherboard do you have? What mouse do you have installed? Link to comment Share on other sites More sharing options...
Seeby Posted February 9, 2015 Author Share Posted February 9, 2015 Hey, sorry for the ridiculously late response. I'm using the Sabertooth Z77 motherboards, and my mouse is the Corsair M65 RGB. Were you able to solve this issue meanwhile? Link to comment Share on other sites More sharing options...
probob Posted February 9, 2015 Share Posted February 9, 2015 Hey, sorry for the ridiculously late response. I'm using the Sabertooth Z77 motherboards, and my mouse is the Corsair M65 RGB. Were you able to solve this issue meanwhile? I made a thread, I was able to install after I did this http://forum.corsair.com/forums/showthread.php?t=135487 Hi, Just thought I would post that I fixed this issue of not installing on my PC. Must be something interfering with the Corsair software, its only this keyboard I had issues with. Anyway, I saw that it was installing 90% + on the drive, so I installed the keyboard on a second PC (clean OS) , looked in C:\Program Files (x86)\Corsair , from there I copied the "Corsair Utility Engine" and replaced that folder with the one my PC HD (PC I was having issues with) Might help others in the future if they have this issue. Thanks Link to comment Share on other sites More sharing options...
Seeby Posted February 9, 2015 Author Share Posted February 9, 2015 I made a thread, I was able to install after I did this http://forum.corsair.com/forums/showthread.php?t=135487 Thanks so much man! Really appreciate the help, finally got it working! Warmest regards, Seeby Link to comment Share on other sites More sharing options...
warlord256 Posted August 16, 2016 Share Posted August 16, 2016 Hi Guys, I just bought a K95 and when I install the Corsair Utility Engine it freezes during installation. So, I downloaded a working installation (Thanks to probob) and now it works fine. But the macros dont seem to work. Please help me out with this issue as the macros are really important for me. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.