Eat420 Posted September 29, 2019 Share Posted September 29, 2019 I just set up my new fans and I can't get the leds working, everything is plugged correctly What I tried -connecting a different USB cable -reset button on the node -testing power on connector that connects fan hub to the lighting node (5v on one pin on each device) -testing the last pin on the 1-6 connectors on the fan hub (5v) I don't know what else to try, I think the fans might be DOA Link to comment Share on other sites More sharing options...
Zotty Posted September 29, 2019 Share Posted September 29, 2019 Hi bud.. OS installed along with iCUE? Link to comment Share on other sites More sharing options...
Eat420 Posted September 29, 2019 Author Share Posted September 29, 2019 I have corsair link and icue installed on a 64 bit windows operating system. I also have the option of booting to Linux which I didn't try but I doubt it's supported Link to comment Share on other sites More sharing options...
Zotty Posted September 29, 2019 Share Posted September 29, 2019 you would only need iCUE buddy.. LINK is EOL now. Link to comment Share on other sites More sharing options...
Eat420 Posted September 29, 2019 Author Share Posted September 29, 2019 Ok so here is what i did 1. uninstalled link + configuration data 2. uninstalled iCUE 3. Rebooted PC 4. installed iCUE from website 5. Tested -> not working lighting node still not detected (only my m65 mouse) 6. Rebooted 7. Tested -> no change any ideas? here are my specs if that helps MOBO: asus X99-A CPU: 5820K GPU: R9 390X PSU: EVGA 850 G2 (80+ gold) RAM: Corsair Vengeance LPX 16GB (2x8GB) DDR4 DRAM 2666MHz Link to comment Share on other sites More sharing options...
Zotty Posted September 29, 2019 Share Posted September 29, 2019 hi again.. and you 100% have the node Pros Sata power and USB cables connected?,, and do you have a normal mini usb cable to try plugging the node pro into your rear IO for testing purposes? Link to comment Share on other sites More sharing options...
Eat420 Posted September 29, 2019 Author Share Posted September 29, 2019 Yep tried that, I plugged in a different USB cable from the rear IO to the node and no change. I also plugged my keyboard in to the USB cable that came with the node and there's nothing wrong with the cable. I tried unplugging the sata power and plugging back in a few times and still no change Tried a different port on the power supply, still nothing Link to comment Share on other sites More sharing options...
Zotty Posted September 30, 2019 Share Posted September 30, 2019 sounds like you need to open an RMA ticket buddy... possible faulty Node Pro? 1 Link to comment Share on other sites More sharing options...
Eat420 Posted September 30, 2019 Author Share Posted September 30, 2019 sigh... i guess so. Thanks for the help though! Link to comment Share on other sites More sharing options...
Zotty Posted September 30, 2019 Share Posted September 30, 2019 Sorry i couldnt help further buddy... RMA should get you sorted... or return to where you bought them Link to comment Share on other sites More sharing options...
Recommended Posts