boydsoule Posted March 2, 2018 Share Posted March 2, 2018 I set up my system as in the picture below but for some reason the Corsair 570x Mirror Black RGB logo in the front and back will not light up. I do not have the OS or LINK software installed yet so that may be the problem but the LL120 fans all light up when i boot the system. I think I set up the wiring correctly but maybe I am missing something. Anything look incorrect with how i did it? Also i noticed the LED on my Commander Pro is not lit up.. was thinking that might have to do with no LINK software installed as well? Link to comment Share on other sites More sharing options...
DevBiker Posted March 2, 2018 Share Posted March 2, 2018 The Commander Pro (CoPro) LED won't light up. No worries there. Get windows and Link installed and configure the logo (as an SP fan, IIRC ... check the RGB FAQ linked in my signature below). If it still doesn't work, come back here and we'll try to get you sorted. Link to comment Share on other sites More sharing options...
Zotty Posted March 2, 2018 Share Posted March 2, 2018 Looks set up right to me :).. glad you have that second RGB Fan LED Hub in there! most miss that! As devbiker said.. get OS and LINK installed :).. once you add the fans/logo into Links Fan Config tab they should all light up.. and yeah logo has to be set up as an SP rgb fan ;).. You seem to be heading in the right direction but as suggested,, have a read of the FAQ thread :) http://forum.corsair.com/v3/showthread.php?t=173880 Link to comment Share on other sites More sharing options...
boydsoule Posted March 2, 2018 Author Share Posted March 2, 2018 Perfect, thanks that worked well. Link to comment Share on other sites More sharing options...
Zotty Posted March 2, 2018 Share Posted March 2, 2018 ACE,, glad your sorted buddy :) Link to comment Share on other sites More sharing options...
Seqwanter Posted June 18, 2018 Share Posted June 18, 2018 (edited) I have mine set up the exact same way as his but without the commander pro I am using one of the lighting node pro that came with my 6 ll120mm fans. I cannot get the case logos to light up I have tried it in channel one and two on it's own rgb hub set up as an sp fan in link and will not work. If I plug the case light coming out of the psu shroud straight into an rgb header on the mother board it lights up fine but I have no control over it any ideas? Edited June 19, 2018 by Seqwanter Link to comment Share on other sites More sharing options...
Zotty Posted June 18, 2018 Share Posted June 18, 2018 Hi bud. and you had it in port one of the RGB Fan LED Hub?.. have you retried it on the button controller also? Link to comment Share on other sites More sharing options...
Seqwanter Posted June 18, 2018 Share Posted June 18, 2018 (edited) Yes it was definitely in port 1. If you mean plug it up how it came wired yes that idea came to me last night because I was thinking how wouldn't it work the way it came? Lol but I tried unplugging it from the lighting node pro and plug the button that came with the case in to the top of the rgb hub (or bottom) while having the logos in port 1 to no avail. Also is it ok to plug it straight into the rgb motherboard header? I didn't know because it was doing this light green fast change to orange thing. Edited June 18, 2018 by Seqwanter Link to comment Share on other sites More sharing options...
Seqwanter Posted June 18, 2018 Share Posted June 18, 2018 Has anyone youve seen ever gotten it to work with the lighting node pro? I've seen couple people get it to work but they had the commander pro. I know it shouldn't matter jw Link to comment Share on other sites More sharing options...
Saka Posted December 17, 2019 Share Posted December 17, 2019 Hi! I have the same problem here too. I have the same case (corsair x570), the logo only has the blue light. O have tried every thin in diffrent forums an still the same problem. I have tried to set up like it came to me but no diffens only the blue light. Have demounted the rgb panel for the logo to see what the problem is. When i did that i could see that one of the led lamp dosent work so i tried to unplugg the 2 cables that are connectet to the led panel and switched them. And then i got the green light but still wrong. But somthing i found out is that one of the cable that plugged in to the panel dosent to much. I can plug it out and it will still be on the same blue color. So i think it can be the cable that haves the problem. Because i have tried man many thinks but nothings worked. If you guys have some ideas pls tell me. Thanks! Link to comment Share on other sites More sharing options...
DevBiker Posted December 17, 2019 Share Posted December 17, 2019 Hi! I have the same problem here too. I have the same case (corsair x570), the logo only has the blue light. O have tried every thin in diffrent forums an still the same problem. I have tried to set up like it came to me but no diffens only the blue light. Have demounted the rgb panel for the logo to see what the problem is. When i did that i could see that one of the led lamp dosent work so i tried to unplugg the 2 cables that are connectet to the led panel and switched them. And then i got the green light but still wrong. But somthing i found out is that one of the cable that plugged in to the panel dosent to much. I can plug it out and it will still be on the same blue color. So i think it can be the cable that haves the problem. Because i have tried man many thinks but nothings worked. If you guys have some ideas pls tell me. Thanks! What does the connector look like? Not all 570's have the RGB logo; some are single color. And ... it's usually best to start your own thread rather than resurrecting a 6 month old thread. Just sayin'. Link to comment Share on other sites More sharing options...
Recommended Posts