Eeggss Posted July 9, 2020 Share Posted July 9, 2020 I attempted a hard reset of my keyboard with a firmware I found online and I'm able to get the keyboard in an operable state where the num lock, caps lock, and other light indicators are blinking. When I try to update the firmware through iCUE, the firmware gets to 100%, then makes the Windows peripheral disconnect sound, and stays stuck at 100%. I tried this with different versions of CUE and iCUE, and it all did the same thing. I even tried using a firmware image I found online for the iCUE app , and I get the error: "the file you selected is not a valid firmware". I tried this all on different polling rates and USB ports, and none of it works. Can anyone help me? Link to comment Share on other sites More sharing options...
Eeggss Posted July 21, 2020 Author Share Posted July 21, 2020 I got the firmware from the support ticket system and it fixed everything. If anyone has the same problem, here is the firmware for a K70 RGB Rapidfire: https://drive.google.com/file/d/1ypjpQ6DFcHleXfeQe2GXY0j61eP0rQD8/view?usp=sharing Link to comment Share on other sites More sharing options...
Recommended Posts