![]() |
#1
|
|||
|
|||
![]()
Hi!
I have tried to configure profiles for the PSU fan but without success, the fan stays between 0-400 RPM, but when configuring 100% it does nothing. ![]() |
#2
|
||||
|
||||
![]()
Once you have selected the profile you want to use you need to then select the fan. More specifically you need to click on the fan you outlined in red that is right next to the picture of the PSU.
|
#3
|
|||
|
|||
![]()
As above. The fan inside your red ringed box will turn yellow when a custom fan curve is applied. Also, be aware that when waking from sleep, the AX1200i will revert to its default fan curve, no matter what you have selected. You cannot force it back through iCUE. You must either restart the PC or disconnect/reconnect the USB from PSU to Motherboard.
|
#4
|
|||
|
|||
![]()
Nice, it works!!
|
![]() |
Thread Tools | Search this Thread |
Display Modes | Rate This Thread |
|
|