dabrit761 Posted March 24, 2018 Share Posted March 24, 2018 Can't find a solution anywhere on these forums or else where. The fans themselves run fine, the problem is with the LED'S. I cannot for the life of me figure out why they aren't working and its driving me insane. i have tried shifting around the order of the cables to no avail, different sata ports still nothing. Link to comment Share on other sites More sharing options...
DevBiker Posted March 24, 2018 Share Posted March 24, 2018 Do you have a Lighting Node Pro or Commander Pro? Have you set them up in Link? Take a look in the RGB FAQ in my signature. Link to comment Share on other sites More sharing options...
dabrit761 Posted March 24, 2018 Author Share Posted March 24, 2018 Neither, i have just the button controller and the fan LED hub. Link to comment Share on other sites More sharing options...
DevBiker Posted March 24, 2018 Share Posted March 24, 2018 Ah. And that is the HD button controller, correct? It should say so on the controller. And the fans are connected to ports 1-2-3-4 in order, right? Assuming that, from the sounds of it, it's either the fan hub or the button controller. It's impossible, right now, to say which one it is. Link to comment Share on other sites More sharing options...
dabrit761 Posted March 24, 2018 Author Share Posted March 24, 2018 yeah its the HD. this on single LED lights up when i have the fans in this order but not in any other orders. Link to comment Share on other sites More sharing options...
DevBiker Posted March 24, 2018 Share Posted March 24, 2018 yeah its the HD. this on single LED lights up when i have the fans in this order but not in any other orders. I'm guessing it's either the hub or the controller. Since you just got it, I'd exchange the entire 3 pack for a new one. Corsair will RMA it but exchanging with your retailer is usually quicker. Link to comment Share on other sites More sharing options...
dabrit761 Posted March 24, 2018 Author Share Posted March 24, 2018 I'm guessing it's either the hub or the controller. Since you just got it, I'd exchange the entire 3 pack for a new one. Corsair will RMA it but exchanging with your retailer is usually quicker. could i not just get a new hub? and what would i need to give me control through software of the LED's? Link to comment Share on other sites More sharing options...
DevBiker Posted March 24, 2018 Share Posted March 24, 2018 For software control of the LEDs, you'd need either a Lighting Node Pro (NoPro) or Commander Pro (CoPro). The NoPro would just do the lighting; the CoPro also allows you to control fans, monitor temperatures, and provides 2 more internal USB ports. Both will allow you to control the fans through Link. However, I'm not sure if the NoPro comes with the connector cable for the Fan Hub. It's a 3-pin connection with the wire for pin 1 missing. You can, however make a cable (see my signature for info and the parts). You could potentially get a new hub (they are available individually from Corsair) but we've no way, at this time, to determine if it's your hub or your controllers that has flaked out. That would certainly help you determine it. But this is brand new ... you shouldn't have to buy it. That why I suggested to exchange at your retailer. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.