The Corsair User Forums  

Go Back   The Corsair User Forums > Corsair Product Discussion > Cooling

Reply
 
Thread Tools Search this Thread Rate Thread Display Modes
  #1  
Old 11-28-2019, 02:21 AM
PhilAlmighty's Avatar
PhilAlmighty PhilAlmighty is offline
Registered User
PhilAlmighty's PC Specs
 
Join Date: Nov 2019
Location: USA
Posts: 4
POST ID # = 1025495
PhilAlmighty Reputation: 10
Question H115i blasting at full speed and not recognized by iCUE

Hello,

Once I start my PC, the fans run at full blast and can't be configured on iCUE since the most recent update to v3.22.74. It isn't consistent, sometimes the program detects the fans after a few reboots and allows configuration. I've verified everything is plugged in, thinking maybe the cable became disconnected. I have attached a USB Deview, which shows it on the Corsair Hydro Series H115i not being detected or plugged in? I've read other posts with a similar situation, but no final resolution. Any suggestions? Thank you in advance!
Attached Images
File Type: png USB Detect.png (63.9 KB, 63 views)
Reply With Quote


  #2  
Old 11-28-2019, 02:27 PM
DevBiker's Avatar
DevBiker DevBiker is offline
CORSAIR Beta Team
DevBiker's PC Specs
 
Join Date: Feb 2017
Location: Republic of Texas
Posts: 8,110
POST ID # = 1025549
DevBiker Reputation: 94
Default

It's got an "Invalid Device Descriptor" error.
While it's running, can you unplug and replug the USB cable? (No, it won't hurt anything).
Did you perhaps have a failed firmware update?
__________________
Please click "Edit System Specs" and fill out your system info.

This comment is provided "as-is", without warranty of any kind, express or implied, including, but not limited to, the sanity or mental fitness of the author. The author is not a Corsair employee, does not represent Corsair, and no comment should be construed as an official statement from Corsair.

Helpful Links and FAQs:
AIO FAQ | RGB FAQ |
HydroX FAQ | RGB Cables |
iCUE Tips & Tricks

Reply With Quote


  #3  
Old 11-28-2019, 06:19 PM
PhilAlmighty's Avatar
PhilAlmighty PhilAlmighty is offline
Registered User
PhilAlmighty's PC Specs
 
Join Date: Nov 2019
Location: USA
Posts: 4
POST ID # = 1025575
PhilAlmighty Reputation: 10
Default

I did unplug and replug it while it was running and windows popped up with a "USB device not recognized" error. I already did reinstall of iCUE. I also did a search on Corsair's site for any firmware, and all I find is iCUE listed for their cooling options. Where do I locate the firmware for this cooler?
Reply With Quote


  #4  
Old 11-28-2019, 10:28 PM
vwxyuqooo vwxyuqooo is offline
Registered User
vwxyuqooo's PC Specs
 
Join Date: Nov 2019
Posts: 1
POST ID # = 1025587
vwxyuqooo Reputation: 10
Default

Hi Phil,

I'm jumping in here because I have the same problems as you, only I got it after a failed attempt of firmware update.

Is there any solution to this?
Reply With Quote


  #5  
Old 11-29-2019, 12:07 AM
PhilAlmighty's Avatar
PhilAlmighty PhilAlmighty is offline
Registered User
PhilAlmighty's PC Specs
 
Join Date: Nov 2019
Location: USA
Posts: 4
POST ID # = 1025588
PhilAlmighty Reputation: 10
Default

Quote:
Originally Posted by vwxyuqooo View Post
Hi Phil,

I'm jumping in here because I have the same problems as you, only I got it after a failed attempt of firmware update.

Is there any solution to this?
Where is this firmware update for the H115i?
Reply With Quote


  #6  
Old 11-29-2019, 09:48 PM
PhilAlmighty's Avatar
PhilAlmighty PhilAlmighty is offline
Registered User
PhilAlmighty's PC Specs
 
Join Date: Nov 2019
Location: USA
Posts: 4
POST ID # = 1025677
PhilAlmighty Reputation: 10
Default

I decided to uninstall the current iCUE version and install two previous versions of iCUE when my fans were working fine. No dice, they still don't get detected by iCUE. This is getting rather annoying hearing a jet by my ear with fans in max RPM, so I submitted a ticket to Corsair support. I am about to just get rid of this AIO cooling by Corsair and getting something else. The amount of reported issues on this subject is ridiculous.
Reply With Quote


  #7  
Old 12-25-2019, 11:35 AM
RoeslerSWE RoeslerSWE is offline
Registered User
RoeslerSWE's PC Specs
 
Join Date: Dec 2019
Location: Stockholm Sweden
Posts: 2
POST ID # = 1028580
RoeslerSWE Reputation: 10
Default

I bump in on this thread cause this is exactly the reason I registered to this forum too. I also tried to update bios on my motheboard, reinstalled windows 10. No effect. My Corsair Hydro H115i are still going on high speed. Also uninstalled a lot of software for trying to detect the fans. Had this problem around a month now, my computer was also built by professionals and I
haven´t open the computer on almost 2 years until two days ago when I got tired of this problem.
Reply With Quote


  #8  
Old 12-29-2019, 01:33 PM
usna92 usna92 is offline
Registered User
usna92's PC Specs
 
Join Date: Apr 2019
Location: Seattle, WA
Posts: 53
POST ID # = 1029046
usna92 Reputation: 10
Default

Firmware update should be listed in iCue as long as the H115i is detected. If it is, you can force a firmware update, even if iCue claims your H115i has the latest version. Let it finish completely. Give your PC a restart and see how it behaves after that.
Reply With Quote


  #9  
Old 01-07-2020, 03:57 PM
RoeslerSWE RoeslerSWE is offline
Registered User
RoeslerSWE's PC Specs
 
Join Date: Dec 2019
Location: Stockholm Sweden
Posts: 2
POST ID # = 1030271
RoeslerSWE Reputation: 10
Default Got these instructions, from support, didn´t work for me

Thank you for reaching us and we apologize for the trouble. This could be an issue with the iCUE software. We recommend performing a clean install of iCUE. Please follow the steps below:

1. Open your computer's Control Panel.
Open the Programs and Features options.
Select Corsair Utility Engine in the list, and then select Uninstall.

2. Press Window Key + R to open the Run command.
Type %appdata% and press Enter.
Delete any Corsair folders in the window that pops up.

3.Return to the Run window and type %localappdata%.
Delete any Corsair folders in the window that pops up.

4. Open File Explorer and navigate to C:\Program Files (x86)\.
Delete any Corsair folders in that folder.

5.Type Regedit in the Run window and then click OK.
Go to HKEY_CURRENT_USER\Software\Corsair\Corsair Utility Engine and delete the folder.
Go to HKEY_LOCAL_MACHINE\SOFTWARE\Corsair\Corsair Utility Engine and delete the folder.

6. Restart your computer.
7. Download a new installer file for iCUE from Corsair.com and reinstall.

If you need assistance with these steps, please reach out to our support team.

Last edited by RoeslerSWE; 01-07-2020 at 03:59 PM. Reason: Making step list of the instructions.
Reply With Quote


Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:19 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, vBulletin Solutions, Inc.