frank2411 Posted November 25, 2016 Share Posted November 25, 2016 Hi everyone, I would like to know if on top of my case a ( 360 ) 60mm thick radiator would fit. With fans in push or pull I'll reach 85mm of thickness. Will this be to much ? If it will be where could it be a place to fit it ? Link to comment Share on other sites More sharing options...
Toasted Posted November 28, 2016 Share Posted November 28, 2016 You'll probably find your answer here; http://www.overclock.net/t/1430077/corsair-750d-owners-club Link to comment Share on other sites More sharing options...
frank2411 Posted November 28, 2016 Author Share Posted November 28, 2016 You'll probably find your answer here; http://www.overclock.net/t/1430077/corsair-750d-owners-club Already checked it say that a 360 radiator is good. But I can't find anything about maximum thickness Link to comment Share on other sites More sharing options...
frank2411 Posted November 28, 2016 Author Share Posted November 28, 2016 ok it says that a 60mm rad with push or pull fans will enter. But I read some reviews and saw some videos and the space for a 60mm it's definitely too tight. Someone has had experience with that ? Link to comment Share on other sites More sharing options...
BJGGut3 Posted November 29, 2016 Share Posted November 29, 2016 In this review, he gives a quick measurement of 88mm from top of the case to the edge of an ATX MB. Which is perfect for a push/pull config rad of 30mm. So, you should be good with a push or pull 60mm rad. [ame] [/ame] Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.