Veter Posted May 14, 2020 Share Posted May 14, 2020 (edited) Всем добра. Подскажите. 1.Поставил водянку Corsair H115i Pro RGB, а при нагрузке процессор стал греться ещё больше. До этого стоял обычный кулер на алюминиевом радиаторе. 2.Почему показания датчиков температуры отличаются от температуры в программе iCUE? Прилагаю скрин Edited May 14, 2020 by Veter Link to comment Share on other sites More sharing options...
c-attack Posted May 14, 2020 Share Posted May 14, 2020 "H115i Temp" is coolant or liquid temperature. This is the measure of how the cooler needs to run. Your CPU can be hot, but if the coolant temperature does not increase, running the fans faster will not remove more heat from the liquid. Your coolant to CPU temp differential is +65C. That is an impossible value to live with. You would need to keep the room between 5-15C to keep from going over 80C. You need to lower or get control over your Vcore. I can't see that in the picture. If your CPU is hot all the time, including at idle (50-60C), then you may not have the pump properly mounted. Link to comment Share on other sites More sharing options...
Veter Posted May 15, 2020 Author Share Posted May 15, 2020 Спасибо. Понесу обратно в магазин, на замену. Настройки кулера на скриншоте. Link to comment Share on other sites More sharing options...
Recommended Posts