kattez Posted May 23, 2011 Share Posted May 23, 2011 I already sent my defective part of TWIN2X2048-6400 G. And now I'm already got replacement part two quantities with the same model. One of these quantities does not work. After I installed on my computer, not any display on my monitor. Then I installed to another computer, the result still same. Already sent the email to customerservice@corsair.com but still no respond. And one more. It's true that my mobo have four slot but only two can put ddr2 stick of ram. And the others two slot are for ddr3. RMA Status for TSX Case #2016490 [ Go to your case ] Thank you for choosing Corsair products! The following is the status of your RMA Number 1225443. RMA Issued On: 4/23/2011 Defective Parts Received on: 5/16/2011 * NOTE: it may take up to 24 hours for this date to be updated after arrival at Corsair Part Number Received: N/A Quantity Received: N/A RMA Replacement Parts Ship Date: 5/17/2011 Replacement Part Number: TWIN2X2048-6400 G Replacement Part Quantity: 2 Replacement Shipping Method: UPS Express Saver *sorry for my english if not perfect Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted May 23, 2011 Corsair Employee Share Posted May 23, 2011 According to the Spec's on the German site yes that is correct it only has 2 DDR2 slots the other slots are DDR3 and you cannot mix DDR2 and DDR3 memory at the same time. Link to comment Share on other sites More sharing options...
kattez Posted May 23, 2011 Author Share Posted May 23, 2011 well, i got replacement part two quantities of TWIN2X2048-6400 G. so I can only use one pair on my mobo. the problem is another pair can not be used. got sound of error and no display. Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted May 23, 2011 Corsair Employee Share Posted May 23, 2011 You cannot mix these modules and when you change them you may have to reset the MB BIOS. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.