Corsair M90 + Aion ?

I have a problem with my M90. I assigned extra-button to numpad 1-9 but it doesn't work when I play Aion. Anybody has an explanation?

Did you assign the profile to an L.E.D. on the mouse, save it to the M90 and enable hardware playback?

 

The manual's included with the software should help.

I can write numbers in firefox/Open office and others but it doesn't work in Aion...

Did you assign, save the profile and enable hardware playback?

 

Aion is a online game, Usually most to all multiplayer games block software playback as it may be a disadvantage towards other players who do not use software playback macros.

 

some applications block macro playback by reading directly from the hardware rather than the Windows keyboard buffer

Source: M90 User's Guide

 

In order to use the M90's buttons in Aion, you need to enable hardware playback.

To do this,

Open the Vengeance software>Manage profiles>Click the L.E.D. dot>Assign a profile to an L.E.D. (1 is the bottom, 6 is the top)>Click "Save to M90" (Wait for the % to reach 100%)>Ok>Enable hardware playback.

 

Once you have enabled hardware playback, You need to check the profile L.E.D.s and make sure its on the correct one. If its not on the correct one, you will need to use the Profile Up/Profile Down button to adjust the L.E.D. profiles.

 

If you do not see a % next to the "Save to M90" button, check if M90hid.exe is running in Task Manager. If not, go to the install folder and double click the .exe.

 

If you have done the above steps and it still does not work, Upload your profile as a .zip attachment here and we'll see what may be causing the problem or try an alternative way.

 

To export the profile, Manage Profiles>Select your profile>Export.

It works ! Thank you.