Alpha_Knugen Posted June 22, 2019 Share Posted June 22, 2019 (edited) Could someone more experienced and with more knowledge make me a diagram picture thingie for how everything is conected. Needed in diagram: What fans should go to what rgb fan led hub and commander. how to chain everything that can go in a chain. Different colors for different cable types. Legend so i know what color is what. can i put commander ontop of eachother or will they be too hot for that to be smart? Can i get ahold of extension cables for the fans and their rgb lightning that doesnt cost like 10bucks a cable or should i just place the commanders in the closest spots? I cant get ahold of the y header cables as they are out of stock everytime i check. -------------------------------------------------------------------------------------- This is the items that i have and can use: 18 LL120 fans (16 in the front 2 in the back) 3 LL140 fans in the top. 3 Commander Pros (included the one preinstalled in case) 3 RGB Fan Led Hub (included the one preinstalled in case) 2 2080 Waterblocks with rgb lighting (Has input and output so can be used in chain. 1 i9 9900KF waterblock with rgb lighting (only one cable for rgb no chain thingies) 1 XD5 RGB pump/reservoir (input and output for RGB and one 4pin pump connector cable) Motherboard : MSI Z390 MEG ACE -------------------------------------------------------------------------------------- I want a diagram as im having a hard time following text guides and its so much easier to do it in the actuall case with a diagram. I know there are plenty of similar diagrams out there but i cant understand where to connect the stuff that i have thats not in those builds so thats why i need this aswell. Edit: I will need to buy some more stuff for sure but a diagram would be useful so i dont buy to much stuff Edit 2: https://imgur.com/IXrnSaj will this work or did i just waste one hour? Edit 3: Looks like my diagram would work! Thanks in Advance! Edited June 23, 2019 by Alpha_Knugen added a pic Link to comment Share on other sites More sharing options...
AngryButters Posted July 12, 2019 Share Posted July 12, 2019 Go through this guys post http://forum.corsair.com/v3/showthread.php?t=180073 Link to comment Share on other sites More sharing options...
DevBiker Posted July 12, 2019 Share Posted July 12, 2019 Your diagram would work ... but you can use fan splitters and/or PWM hubs instead of a gazillion Commander Pros (sorry Corsair). You can also make your own cables - see my signature for details. Link to comment Share on other sites More sharing options...
AngryButters Posted July 14, 2019 Share Posted July 14, 2019 Thanks for the idea Devbiker! I'm planning on doing a 1000D LL Fans upgrade with water-cooling and having a lot of Commander Pros will cost an arm and a leg. Link to comment Share on other sites More sharing options...
Zotty Posted July 14, 2019 Share Posted July 14, 2019 this is one option... http://i.imgur.com/q0shRm4l.png I drew this up before the PWM Repeater Hubs became available in spares.. https://www.corsair.com/uk/en/Categories/Products/Accessories-%7C-Parts/PC-Components/Cases/Carbide-678C-6-port-PWM-Repeater/p/CC-8900355 will knock up a drawing for it when my RL job calms down a little.. Crazy hours atm.. Link to comment Share on other sites More sharing options...
Recommended Posts