aryan22 Posted August 28, 2019 Share Posted August 28, 2019 16GB Corsair Vengeance LPX LP schwarz DDR4-3200 DIMM CL16 Dual Kit It runs at 2133 but the Rated Speed is 3200 when i enable xmp i get no screen and IT resets or i her bluescreens pls help Link to comment Share on other sites More sharing options...
A Computer Guy Posted August 28, 2019 Share Posted August 28, 2019 (edited) 16GB Corsair Vengeance LPX LP schwarz DDR4-3200 DIMM CL16 Dual Kit It runs at 2133 but the Rated Speed is 3200 when i enable xmp i get no screen and IT resets or i her bluescreens pls help XMP doesn't always work. Make sure your ram is installed in slots A2 and B2. Basically try using AUTO memory settings then manually enter your DRAM voltage, frequency, and timings. Run memtest86 to help ensure you have a stable setup. For simplicity start with voltage and frequency first. Once you can lock onto a stable frequency then attempt timings. Edited August 28, 2019 by A Computer Guy Link to comment Share on other sites More sharing options...
aryan22 Posted August 28, 2019 Author Share Posted August 28, 2019 XMP doesn't always work. Make sure your ram is installed in slots A2 and B2. Basically try using AUTO memory settings then manually enter your DRAM voltage, frequency, and timings. Run memtest86 to help ensure you have a stable setup. For simplicity start with voltage and frequency first. Once you can lock onto a stable frequency then attempt timings. okay how high can i go with the Vorlage Link to comment Share on other sites More sharing options...
A Computer Guy Posted August 29, 2019 Share Posted August 29, 2019 okay how high can i go with the Vorlage The DRAM voltage should be printed on the back of your memory module next to the model and version number. Typically 1.35v is common but you need to check to be sure. Link to comment Share on other sites More sharing options...
Recommended Posts