The Corsair User Forums  

Go Back   The Corsair User Forums > Corsair Product Discussion > Memory

Notices

Reply
 
Thread Tools Search this Thread Rate Thread Display Modes
  #1  
Old 02-17-2020, 05:11 AM
shadwbomber shadwbomber is offline
Registered User
shadwbomber's PC Specs
 
Join Date: Sep 2019
Posts: 5
POST ID # = 1035256
shadwbomber Reputation: 10
Default Corsair(DRAM different manufacture & die)

I have 2 Corsair Vengeance LPX 3000mhz RAM.
But when i see both RAMs in Typhoon Burner the DRAM manufactures & die density are different.
Values are different in DRAM calculator too.
What values should I type in the in BIOS?Because RAMs are currently runnung at 2133mhz.

Please check the link I have posted.

Typhoon Burner

https://drive.google.com/file/d/19RS...ew?usp=sharing

DRAM Calaculator

https://drive.google.com/drive/folde...Nn?usp=sharing

Please guide me to solve this issue.
Thank You.

Last edited by shadwbomber; 02-17-2020 at 01:11 PM.
Reply With Quote


  #2  
Old 02-18-2020, 02:48 PM
Phroze Phroze is offline
Registered User
Phroze's PC Specs
 
Join Date: Jan 2020
Posts: 17
POST ID # = 1035389
Phroze Reputation: 10
Default

Those are two completely different chip types and I would not recommend running them together at all let alone setting custom timings. You need to have a matched pair of sticks. I believe that Micron is usually better than Hynix but the best of the best is Samsung B die.
Reply With Quote


  #3  
Old 02-18-2020, 04:32 PM
senhordd senhordd is offline
Registered User
 
Join Date: Feb 2020
Location: Brazil
Posts: 1
POST ID # = 1035397
senhordd Reputation: 10
Default

I would configure it with the slower module timings as a base, the hynix one in your case, but dont expect to reach the full 3000mhz.. well, try it... if it doens work put the clock down a bit to 2933, 2800... it will depend on the motherboard quality as well.
Reply With Quote


  #4  
Old 02-18-2020, 11:13 PM
intender's Avatar
intender intender is offline
Registered User
intender's PC Specs
 
Join Date: Feb 2017
Posts: 26
POST ID # = 1035434
intender Reputation: 10
Default

The hynix cjr will probably clock better than the micron. I have some micron b die from another manufacturer and it really hits its limit right around 3000 with realistic voltage. I have 2 corsair Vengeance RGB 3000 kits and both of them easily hit 3600 at 16-18-18-18. CJR will not do tight timings like samsung bdie, but most of the cl16 3600 kits you see on the market these days have hynix cjr.

That said mixed ram can sometimes not be an issue at all, but quite often it can lead to instability. When buying ram you need to try and make sure you get not only the same model number, but the same revision to ensure that it matches. If you can't ensure that your revision numbers will match then you should buy a kit that comes with 4 sticks. Retailers will not guarantee that separate kits are the same revision.
Reply With Quote


Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:17 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, vBulletin Solutions, Inc.