Kvantum Posted April 11, 2018 Share Posted April 11, 2018 I'm running iCue just fine and it's handling FarCry 5 integration like a dream... except it never makes use of fans 5 and 6 in my system. My setup is a Mirror Black 570X and an H150 with fans 1-3 in the front, fans 4 and 5 as exhaust in the top, and fan 6 as the rear exhaust. All fans are LL 120s on Lighting Channel 2 of a Commander Pro. (The H150 is also mounted with the 3 ML120s it came with as the Pull fans, if it might matter, but they are controlled through the H150 itself.) Also, I do have the RGB logos of the case itself set up in the Commander Pro as a single SP fan on Lighting Channel 1, but the logos do work normally in-game. All firmware is up to date, Win 10 Pro 64, build 16299.371. Link to comment Share on other sites More sharing options...
jl94x4 Posted April 12, 2018 Share Posted April 12, 2018 I have the same issue, although its only Fan 6 not working. Kinda ruins the immersion a little... Link to comment Share on other sites More sharing options...
gmoneda Posted April 14, 2018 Share Posted April 14, 2018 The effect file in the Program files\Corsair\Corsair Utility Engine\GameSdkEffects\FarCry5 does not have enough entries for all the leds in that many fans. I have a previous post on it. Id looked like a bit of work so I didn't do it hoping they might fix it. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.