Snotta Posted August 29, 2018 Share Posted August 29, 2018 Unsure if I am missing something or just gone overkill, I installed a H100i V2 for the cpu - works fantastic then since my GPU gets 70-80 I bought a NZXT mount and installed another Hv100i V2 - yeah yeah probably overkill, but heres my problem the LINK software doesn't pick up that I have 2 separate H100i has anyone done something similar and if so how did you get around it I need to be able to set custom fan/pump for each cooler - is it possible? What am i missing - TIA Link to comment Share on other sites More sharing options...
DevBiker Posted August 29, 2018 Share Posted August 29, 2018 Are both coolers plugged in to USB? Do both coolers show up in Device Manager? Link to comment Share on other sites More sharing options...
Corsair Employee Corsair Jam Posted August 29, 2018 Corsair Employee Share Posted August 29, 2018 Are both coolers plugged in to USB? Do both coolers show up in Device Manager? Piggybacking off DevBiker here - are you using any type of splitter for the USB headers or are they direct connected to your motherboard? Link to comment Share on other sites More sharing options...
Snotta Posted August 31, 2018 Author Share Posted August 31, 2018 Both are plugged into the MB but only one device shows up - wondering if one of my units is faulty - will have to try individually to test - haven't done that - bugga both are plugged into separate usbs Link to comment Share on other sites More sharing options...
DevBiker Posted August 31, 2018 Share Posted August 31, 2018 It may also be a cable issue ... you can use a standard mini USB cable and plug into a rear I/O header. Link to comment Share on other sites More sharing options...
Daitallica Posted December 31, 2018 Share Posted December 31, 2018 Heyo Couple questions regarding the nzxt bracket and the h100i Is it an NZxt G10 or 12 ? Is the h100i a square block or a round one and if its a square one, how did you get it to fit on the nzxt bracket coz I want to do this too but I thought only round blocks fit the nzxt g10 & 12 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.