afrooman Posted January 17, 2013 Share Posted January 17, 2013 Hi all I am LatinAmerican and I bought a memoir and I installed but it happens that the first time I face this problem that are 1866MHz and 1333 shows the motherboard. How I can put them to work to their potential which was manufactured? My build is 990FXA-UD3 rev1.1 FX 8350 (compatiblity with 1866mhz) Corsair Dominator Platinum 1866mhz 2X4(8gb) Timing Tested 9-10-9-27 SPD Timing 9-9-9-24 i put photos of CPU-Z please i need help T_T I need a tutorial or something to make them work a little unhappy I have to work slow. Powered by Google Traductor XDDD. Link to comment Share on other sites More sharing options...
Turbonerfs101e Posted January 17, 2013 Share Posted January 17, 2013 Hi afrooman Because u have a AMD base system you have to manualy set you memory speed, voltage and timing. Hope this helpSincerly yours Link to comment Share on other sites More sharing options...
afrooman Posted January 17, 2013 Author Share Posted January 17, 2013 Hi afrooman Because u have a AMD base system you have to manualy set you memory speed, voltage and timing. Hope this help Sincerly yours How? Can teach me? Link to comment Share on other sites More sharing options...
Turbonerfs101e Posted January 17, 2013 Share Posted January 17, 2013 Yes Give me a frew minutte so a could read your manual Your Moterboard is 990FXA-UD3 with CMD8GX3M2A1866C9 memory and FX8350 cpu? Link to comment Share on other sites More sharing options...
Turbonerfs101e Posted January 17, 2013 Share Posted January 17, 2013 OK, donload manuel from Gygabytehttp://www.gigabyte.com/products/product-page.aspx?pid=3894#manualk Read page 33 to 37 1- enter Bios2- enter MB inteligent tweaker3- set Memory clock from 1333MHz to 1866MHz4- enter DRAM configuration {Press enter}5- set latancy RAS to CAS R/W drelay tfrom 9 to 10 and maximum RAS activite time from 24 to 27. Ther you go You may have to update bios to run 1886MHz stable Hope this help Link to comment Share on other sites More sharing options...
afrooman Posted January 18, 2013 Author Share Posted January 18, 2013 OK, donload manuel from Gygabyte http://www.gigabyte.com/products/product-page.aspx?pid=3894#manualk Read page 33 to 37 1- enter Bios 2- enter MB inteligent tweaker 3- set Memory clock from 1333MHz to 1866MHz 4- enter DRAM configuration {Press enter} 5- set latancy RAS to CAS R/W drelay tfrom 9 to 10 and maximum RAS activite time from 24 to 27. Ther you go You may have to update bios to run 1886MHz stable Hope this help Thanks i can see 1866mhz so only need update bios anymore Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.