The Corsair User Forums  

Go Back   The Corsair User Forums > Corsair Product Discussion > Corsair Link

Notices

Reply
 
Thread Tools Search this Thread Rate Thread Display Modes
  #1  
Old 11-02-2019, 08:38 AM
gravy1958 gravy1958 is offline
Registered User
 
Join Date: Aug 2015
Posts: 4
POST ID # = 1022884
gravy1958 Reputation: 10
Default Noob to aRGB

I just saw my mates rgb case and got bitten by the bug :) but I really need help to know what to buy.

I'm buying the corsair crystal 680X case. it comes with 3 LL120 fans and 1 non rgb fan I intend to replace with 1 of the 3 from an LL120 kit
I'm also going to use a h100i RGB platinum cooler... so I will be using 8 fans (including the 2 on the aio).

So I have a few questions

1. What do I need to control all of these 8 fans?
2. do the fans on the h100i only work together in RGB or can I control the RGB individually... I want to make all 8 fans run in a sequence in some profiles but don't want both aio fans to work as 1 fan. Also, now I'm thinking about adding some corsair led strip lighting as well

Apologies if this subject has already been discussed to infinity before and Thanks in advance

Last edited by gravy1958; 11-02-2019 at 10:31 AM. Reason: more rgb
Reply With Quote


  #2  
Old 11-02-2019, 05:58 PM
DevBiker's Avatar
DevBiker DevBiker is offline
CORSAIR Beta Team
DevBiker's PC Specs
 
Join Date: Feb 2017
Location: Republic of Texas
Posts: 7,833
POST ID # = 1022912
DevBiker Reputation: 88
Default

It's possible that you can control them from the motherboard though you may need splitters. The AIO fans will be controlled by the cooler itself though, so you don't need to worry about them. The Commander Pro will also provide control over fans but is usually optional.
You won't be able to get 8 fans in sequence. You can control up to 6 fans on a single channel; within the channel, they can run in sequence. That said, there are "Lighting Link" effects that do run across different channels.

Take a look at the RGB FAQ that's listed in my signature. That'll help get you started down the path. But feel free to ask any questions or clarifications that you need after reviewing the FAQ.
__________________
Please click "Edit System Specs" and fill out your system info.

This comment is provided "as-is", without warranty of any kind, express or implied, including, but not limited to, the sanity or mental fitness of the author. The author is not a Corsair employee, does not represent Corsair, and no comment should be construed as an official statement from Corsair.

Helpful Links and FAQs:
AIO FAQ | RGB FAQ |
HydroX FAQ | RGB Cables |
iCUE Tips & Tricks

Reply With Quote


  #3  
Old 11-03-2019, 10:38 AM
gravy1958 gravy1958 is offline
Registered User
 
Join Date: Aug 2015
Posts: 4
POST ID # = 1022948
gravy1958 Reputation: 10
Default

Thanks for the reply, I've been checking your videos :)

So if I have 6 aRGB fans and an h100i RGB platinum cooler... the fans will all run using the nodes/ hubs that come with the 680x case and with the 3 fan kit and I can control their rgb using icue?

will there be enough ports for the aio rgb to also plug in or will that need to go through the mobo (gigabyte Aorus, not corsair compatible)

would one or two commanders be needed or not unless I need specific rgb control?

I ask all this because I'm currently building a spec on pcspecialist, the 680x has 3 rgb fans, the cooler has 2 rgb fans and every time I try to add a 3 fan kit, it says I have a compatibility problem and need to remove either the fan kit or the RGB cooler... I'm assuming the configurator sees 8 fans in total and perhaps the hud/node cannot run more fans, but I assume the hub/node in the case is enough to run the case fans and the aio and what hub/node comes with the fan kit would run the 3 fans or daisy chain off the case node/ hub...

perhaps the configurator is assuming I am ordering the fan kit by mistake or maybe it knows I will need a commander 2... I'm not sure, although I have seen cases with 12 fans, so I thought 6 and 2 on the aio would be fine.

Last edited by gravy1958; 11-03-2019 at 10:43 AM.
Reply With Quote


  #4  
Old 11-03-2019, 11:20 AM
DevBiker's Avatar
DevBiker DevBiker is offline
CORSAIR Beta Team
DevBiker's PC Specs
 
Join Date: Feb 2017
Location: Republic of Texas
Posts: 7,833
POST ID # = 1022950
DevBiker Reputation: 88
Default

Make sure that you double check the RGB setup if you are having it built for you. I cannot tell you how many times we've seen this messed up by SIs. That's not to say that they will get it wrong ... of course, the only ones we here about around here are the ones that are messed up so ... there's that.

Now ... the 680X comes with a Lighting Node Pro and an RGB Fan LED Hub. You can put a total of 6 RGB Fans on that Fan Hub. So you don't need the 3 fan kit; you can do 3 individual fans (and that should be less expensive). The 2 fans connected to the AIO can be controlled by the RGB controller on the AIO. So there is the RGB control for all eight fans on your system.

Next is USB - you'll need 2 internal USB headers. I'm not sure what your motherboard has so that may be the compatibility issue as well ... adding a LNP in the 3 pack would require a 3rd USB port even though you don't need that 2nd LNP in the 3 pack.

The next question is how to control fan speed - and that may be where they are flagging compatibility as well. Unless you have a Commander Pro, fan speed will be controlled by the motherboard. You'll probably need splitters (at least) to control the six fans from the motherboard. That depends on how many fan headers the motherboard has. The Commander Pro has 6 fan headers built in so each fan would be independently controllable.

Finally, if you want a Commander Pro (and it is optional), you'd only need one. And right now, with what you've listed, in either case, you'd have an open Lighting Channel that you can put RGB strips on if you want.
__________________
Please click "Edit System Specs" and fill out your system info.

This comment is provided "as-is", without warranty of any kind, express or implied, including, but not limited to, the sanity or mental fitness of the author. The author is not a Corsair employee, does not represent Corsair, and no comment should be construed as an official statement from Corsair.

Helpful Links and FAQs:
AIO FAQ | RGB FAQ |
HydroX FAQ | RGB Cables |
iCUE Tips & Tricks

Reply With Quote


  #5  
Old 11-03-2019, 12:33 PM
gravy1958 gravy1958 is offline
Registered User
 
Join Date: Aug 2015
Posts: 4
POST ID # = 1022955
gravy1958 Reputation: 10
Default

That's great thanks

I was thinking of using the gigabyte z390 aorus elite as it gets the highest reviews consistently, even rated better than some more expensive mobo's. It has 2 usb 2.0 headers and a usb 3.1 and usb 3.1 type c, so I'm assuming I can just use the 2 x usb 2.0 headers.

I'm sure the mobo could handle fan speeds, especially as I'm not overclocking and a case this big with these fans should have no problem keeping cool :) . But I think I will buy a commander after seeing the diagrams in your FAQ thread, as it seems easier to take control of fan speeds, I think 5 pulling and 3 pushing should create a nice gentle positive pressure and the 2 fans on the bottom of the case should be putting plenty of cool air over the gpu.

Thanks for pointing me in the right direction, the diagrams and videos are invaluable, but your answers helped even more. I'm confident of what I need to order and what instructions to add

Last edited by gravy1958; 11-03-2019 at 12:35 PM.
Reply With Quote


  #6  
Old 11-03-2019, 04:04 PM
DevBiker's Avatar
DevBiker DevBiker is offline
CORSAIR Beta Team
DevBiker's PC Specs
 
Join Date: Feb 2017
Location: Republic of Texas
Posts: 7,833
POST ID # = 1022970
DevBiker Reputation: 88
Default

Sounds like you are on the right track. The CoPro will make it easier to control fan speeds - also, you can use the thermistors to control case fan speeds based on case temperatures. It's super-cool (IMHO).

Let us know if you have further questions.
__________________
Please click "Edit System Specs" and fill out your system info.

This comment is provided "as-is", without warranty of any kind, express or implied, including, but not limited to, the sanity or mental fitness of the author. The author is not a Corsair employee, does not represent Corsair, and no comment should be construed as an official statement from Corsair.

Helpful Links and FAQs:
AIO FAQ | RGB FAQ |
HydroX FAQ | RGB Cables |
iCUE Tips & Tricks

Reply With Quote


Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:00 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.