Spellcaster Posted October 7, 2019 Share Posted October 7, 2019 Excuse how to remove trays? Link to comment Share on other sites More sharing options...
Zone55555 Posted October 8, 2019 Share Posted October 8, 2019 You mean the fan trays I assume? Pull them out partway, you'll see and feel plastic clips top and bottom come out. You move them to the other side from where they are (2 at the same time per tray) and then they'll allow the tray to remove completely. Link to comment Share on other sites More sharing options...
Spellcaster Posted October 8, 2019 Author Share Posted October 8, 2019 Many thanks for a swift response. I press that to clips hard enough. No success ( Link to comment Share on other sites More sharing options...
Zone55555 Posted October 8, 2019 Share Posted October 8, 2019 I would take some photos for you to help you see, but my system's all assembled and I'd have to take apart my water loop. Sorry man. Maybe someone's kept some photos from their assembly phase. Link to comment Share on other sites More sharing options...
Zone55555 Posted October 8, 2019 Share Posted October 8, 2019 Found an at least halfway reasonable image that I mangled with mspaint, forgive my toddler-grade art skills, hopefully it gives you the idea. Find the little plastic "finger" that I've circled, one exists on both sides. One goes down to disengage, the other side goes up to disengage. Both must be disengaged to allow the tray to fully telescope out of the roller arms. So I may have drawn it backwards, but you're smart and will figure it out. Top and side trays work the same. Link to comment Share on other sites More sharing options...
Recommended Posts