gutcheck Posted June 1, 2018 Share Posted June 1, 2018 Hey guys, Starting a build with a z370 mITX board and a hopefully z390 board in the near future and wanted to avoid having to deal with dual PSU's. Both systems will have a single vid card, a 1080 and 1180 when they emerge. Will this work? Thanks! Link to comment Share on other sites More sharing options...
Corsair Employee Corsair Mint Posted June 1, 2018 Corsair Employee Share Posted June 1, 2018 Hi gutcheck, normally no, because you'll only have a single set of cables for the mobo, like the 24-pin. Unless you're splitting something...but we don't have any solutions that. Link to comment Share on other sites More sharing options...
gutcheck Posted June 1, 2018 Author Share Posted June 1, 2018 I feel stupid now, that makes too much sense. Ok, so second PSU it is. So if I used a Corsair SF600 for the ITX build, would it be too much to ask of this unit to push a coffee lake cup on turbo, a 1080, a z370 board with a single SSD connected, and possibly a pump/fans for the WC loop? Maybe I should do one huge loop to cool both systems.... but then that would have to be on for the ITX system to be on, so I can't do that... bah... this is going to be hard. Link to comment Share on other sites More sharing options...
teshreve Posted June 2, 2018 Share Posted June 2, 2018 There are lots of options out there besides this one: https://www.ebay.com/itm/PCI-E-6pin-Input-DC-ATX-250W-24pin-Power-Supply-Module-Swithc-Pico-PSU-Car-Auto-/323094106829 But look for versions of these pico power supplies that have a PCI-E input. You could then put totally power the z370 with the ax1600i and use one spare PCI-E cable to power the Pico PSU (which includes the other mobo plug as well). Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.