CUExecutor Posted January 6, 2018 Share Posted January 6, 2018 so I've tried setting up a rapid fire macro in CUE and it didn't go as planned. I want to be able to hold down the forward button on my Glaive and it to spam the left click and then stop upon release. Any help? Link to comment Share on other sites More sharing options...
hastegag Posted January 7, 2018 Share Posted January 7, 2018 Since no one wants to post on my thread. I'll post it here. I want a similar thing but I want to be able to hold the forward button on my mouse and while it is being held it will spam left click so it will rapidly shoot but upon release I want it to stop and then start again when I hold it again. Any suggestions? I just did this on the scimitar and had no problem with toggle functionality, but you have to be careful with the timings (ie im not sure anything around 8 ms is a good idea or the toggle may not fire in time). Your mileage may vary with the Glaive as I don't have one http://smithany.com/workshere.png Link to comment Share on other sites More sharing options...
CUExecutor Posted January 8, 2018 Author Share Posted January 8, 2018 Will test this right now Link to comment Share on other sites More sharing options...
CUExecutor Posted January 8, 2018 Author Share Posted January 8, 2018 mine shows this http://prntscr.com/hxep1k Link to comment Share on other sites More sharing options...
hastegag Posted January 8, 2018 Share Posted January 8, 2018 Your picture isn’t showing up but the other reply said the same. Did you hit the tool icon? I can’t see yet what you meant yours looks like Link to comment Share on other sites More sharing options...
Administrators Technobeard Posted January 8, 2018 Administrators Share Posted January 8, 2018 CUExecutor - please don't bump a thread < 24 hours and please don't post the same thing in multiple threads, thanks. All posts have been moved here and consolidated. Link to comment Share on other sites More sharing options...
hastegag Posted January 9, 2018 Share Posted January 9, 2018 https://image.prntscr.com/image/uSlRumlFQDKLYx-yB9D-OA.png I inspected the page, that PNG you screencapped looks like it didnt upload good. I see you had selected the first / forward button and are associating it to something, but the something I/we're not seeing even when we navigate to your posted image. please look into it as we can probably help? Thnx Link to comment Share on other sites More sharing options...
CUExecutor Posted January 15, 2018 Author Share Posted January 15, 2018 what were you doing with AHK in the screenshot? you got discord? I think this would be easier if we can talk live. http://prntscr.com/i0iz9d Link to comment Share on other sites More sharing options...
CUExecutor Posted January 15, 2018 Author Share Posted January 15, 2018 https://image.prntscr.com/image/uSlRumlFQDKLYx-yB9D-OA.png I inspected the page, that PNG you screencapped looks like it didnt upload good. I see you had selected the first / forward button and are associating it to something, but the something I/we're not seeing even when we navigate to your posted image. please look into it as we can probably help? Thnx what were you doing with AHK in the screenshot? you got discord? I think this would be easier if we can talk live. https://image.prntscr.com/image/uSlRumlFQDKLYx-yB9D-OA.png Link to comment Share on other sites More sharing options...
hastegag Posted January 15, 2018 Share Posted January 15, 2018 “what were you doing with AHK in the screenshot? you got discord? I think this would be easier if we can talk” Yeah definitely have discord we can talk if we can’t figure it out but your image came through and you just need to click on the icon on the far right towards the bottom of the overall screen has a screwdriver and wrench. That is where the pass through and other advanced settings like repeat are. Autohotkey was just showing keyhistory so I could be sure it was doing what I thought it was / test it was working. Link to comment Share on other sites More sharing options...
CUExecutor Posted January 15, 2018 Author Share Posted January 15, 2018 Add me: Gucci#5541 Link to comment Share on other sites More sharing options...
hastegag Posted January 16, 2018 Share Posted January 16, 2018 I requested you. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.