Outerarm Posted July 6, 2015 Share Posted July 6, 2015 Hi, Is there any difference between the H100 and H100i 'X' shaped backing plate for the CPU pump? I'm likely to change my 100 to 100i as I think the pump has died and was wondering if I can leave the backing plate in place. Cheers Link to comment Share on other sites More sharing options...
Corsair Employee Corsair Dustin Posted July 7, 2015 Corsair Employee Share Posted July 7, 2015 Should be the same, should be fine. Link to comment Share on other sites More sharing options...
Smiffo Posted July 9, 2015 Share Posted July 9, 2015 I kept the backplate from my H100i in place when I changed to the H110i GT & everything's fine. You should be good. Link to comment Share on other sites More sharing options...
Outerarm Posted July 13, 2015 Author Share Posted July 13, 2015 Thanks, yes, the back plate was the same and installation was pretty straightforward. Just had to replace the old stand-off screws with the news ones shipped with the 100i. Link to comment Share on other sites More sharing options...
cravinmild Posted July 13, 2015 Share Posted July 13, 2015 ive kept the same backplate since the H70. Had a H70-H100-H110-swiftech H320. Some visual differences but screw holes all line up. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.