The Corsair User Forums  

Go Back   The Corsair User Forums > Corsair Product Discussion > Memory


Thread Tools Search this Thread Rate Thread Display Modes
Old 09-06-2019, 03:40 AM
Hunk Hunk is offline
Registered User
Join Date: Aug 2019
Posts: 3
POST ID # = 1017077
Hunk Reputation: 10
Default Can't post on warm boot

Hello, here is my rig:

CPU: AMD 3700x stock
RAM: Corsair Vengeance RGB Pro 3600/18-19-19-39 1.35V (CMW16GX4M2C3600C18W), software and review tell these are b-dies.

Here is the problem: even everything on default settings board can't post with this RAM on warm start (like just after shutdown). The default for these sticks is 2133, 1.2V, 15-15-15-36. If i wait for 30-60 secs after shutdown it boots ok.

I did some tests but i can't manage to fix this issue. C7H have setting for Dram boot voltage but it bricks system to the same post error. Tried different dram voltages with no success (1.2, 1.3, 1.35, 1.4, 1.45, 1.5).

Tried procODT (60 ohm and lower) and CAD_BUS (24 ohm -> 20 ohm) with no luck.

The thing is when it boots normally it works with no issues, no BSODs or memory errors in Memtest86 and TM5, games, etc. I can use my XMP profile too, coz the board doesn't shutdown on applying XMP settings so it boots ok. Unfortunately newer bioses for C7H forces ram changes to make double boot, so i assume it at the end triggers warm boot problem and system can't post. Was lurking Asus forums for people with the same problems and have found a few with similar warm boot or restart errors. So it could be just incompatibility with this particular ram with this board or Asus boards in general.

I can live with old BIOS if it works, but still have hope it can be fixed somewhere in BIOS. Appreciate any suggestions.
Reply With Quote

Old 11-11-2019, 03:22 AM
Hunk Hunk is offline
Registered User
Join Date: Aug 2019
Posts: 3
POST ID # = 1023602
Hunk Reputation: 10

The problem is fixed with bios 2901. XMP works as expected now.
Reply With Quote


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -4. The time now is 11:56 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, vBulletin Solutions, Inc.