likearocket Posted January 13, 2019 Share Posted January 13, 2019 Hello. Can someone advise the best way to connect and control a H100i v2 AIO on a Gigabyte Z390 Aorus? I currently have it connected to the CPU_FAN header with the two fans connected to the pump. These are my settings in the BIOS: CPU Fan Speed Control: Full SpeedFan Control Use Temperature Input: CPUCPU Fan Control Mode: PWM Can someone confirm these are the correct settings to supply 12V to the pump and allow full control of the fans? Thanks in advance! Link to comment Share on other sites More sharing options...
c-attack Posted January 13, 2019 Share Posted January 13, 2019 Yes, that's fine. As long as the BIOS fan controls don't try to reduce the speed (and thus the voltage to the cooler), you are good. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.