The Corsair User Forums  

Go Back   The Corsair User Forums > Corsair Product Discussion > Memory

Reply
 
Thread Tools Search this Thread Rate Thread Display Modes
  #1  
Old 09-23-2015, 01:07 PM
memoryq memoryq is offline
Registered User
memoryq's PC Specs
 
Join Date: Sep 2015
Posts: 2
POST ID # = 810173
memoryq Reputation: 10
Question DDR4 kit with lowest timings at 2133mhz?

Hi,

What are the lowest timings (at 2133mhz) that a 32GB DDR4 kit can run at with the Asus Z170 Deluxe motherboard? I don't want to increase the voltage very much.

Can any kits run at lower than 10-10-10-20 and remain stable?

Thanks!
Reply With Quote


  #2  
Old 09-23-2015, 01:53 PM
Wired's Avatar
Wired Wired is offline
Administrator
Wired's PC Specs
 
Join Date: Aug 2000
Posts: 32,188
POST ID # = 810192
Wired Reputation: 32
Default

Have you checked the DDR4 sticky or the website?
__________________
No, I don't work for Corsair
...you need to flow like a river...
Forum Rules
Admin of this forum / webdesignforums.net / Petri's IT Forum / The Corsair Memory Steam Group
Founder/Creator/Admin of ZE SECRET PROJECT (Coming Soon)
Reply With Quote


  #3  
Old 09-23-2015, 02:57 PM
memoryq memoryq is offline
Registered User
memoryq's PC Specs
 
Join Date: Sep 2015
Posts: 2
POST ID # = 810200
memoryq Reputation: 10
Default

Hi, I've checked both the sticky & website but there is no info on such tight timings.
I would be running higher speed DDR4 at 2133mhz in order to achieve low timings.

What are the lowest timings that these Dominator Platinum kits can achieve at 2133mhz?

CMD32GX4M4A2800C15
CMD32GX4M4A2800C16
CMD32GX4M4B3000C15

Thanks again
Reply With Quote


  #4  
Old 09-23-2015, 04:21 PM
Technobeard's Avatar
Technobeard Technobeard is offline
Bearded Corsair Employee
 
Join Date: Oct 2012
Posts: 4,286
POST ID # = 810210
Technobeard Reputation: 68
Default

We can only guarantee the rated timings.
__________________
“Humor is reason gone mad.” - Groucho Marx
"I suggest a full frontal assault with automated laser monkeys, scalpel mines and acid." - Psychotic potato dwarf
"Do not meddle in the affairs of wizards, especially simian ones. They are not all that subtle." - Terry Pratchett
Reply With Quote


  #5  
Old 09-23-2015, 05:27 PM
c-attack c-attack is offline
Registered User
c-attack's PC Specs
 
Join Date: Jun 2014
Posts: 9,228
POST ID # = 810213
c-attack c-attack Reputation: 107
Default

You may be better off looking at the Asus ROG pages or the Z170 thread on Overclock.net for the specific timings people are able to achieve. At this point, the platform will have some say as to what is possible. However, I suspect we are not at 10-10-10-20 T1 at this point.

I am not exactly certain as to your goal with lowest possible 2133 settings. Nearly any increase at that setting is going to require voltage closer to 1.35V. If you goal is to stay at 1.20, then you are better off with the mid-range kits. You appear to have selected just that, but if you are hoping for the lowest possible latency at 2133, you may be surprised with the results. Any 2666 kit at 15's and 1.20 is going to beat the mythical 10/20 kit 2133, including latency or at least the the way AIDA measures it. I would go for the highest speed C15 kit in your budget range and know it likely can run higher and almost certainly with tighter timings than XMP without a voltage bump.

Last edited by c-attack; 09-25-2015 at 09:04 AM.
Reply With Quote


  #6  
Old 09-23-2015, 05:58 PM
emissary42's Avatar
emissary42 emissary42 is offline
Registered User
emissary42's PC Specs
 
Join Date: Aug 2013
Location: Nehr'esham
Posts: 987
POST ID # = 810217
emissary42 emissary42 Reputation: 122
Default

Some of the better kits can run CL10 @ DDR4-2666+, but that does require a more voltage than 1.20V. At DDR4-2133 CL10 might actually be possible with less than 1.20V, but that also depends on IC type and its specific scaling characteristics.

Since there are probably no universal preset for something like this, you will just have to try it yourself ;)

Edit: You will get better performance numbers at a higher memory clock rate, though.
Reply With Quote


Reply

Tags
asus, cas latency, ddr4, latency, timings

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 05:50 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.